Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4765152 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair Replacement Of Submersible Pumping Sets,pump Starters,dosing Equipments And Other Miscellaneous Works At Af Stn Memaura |
| Last Date For Submission | 23rd Jul, 2026 |
| Opening Date | 30 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 19000.00 |
| Estimated Cost | 0.00 |
| City | Lucknow |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Material & labour testing of water of bore well,test to be carried out as per I.S. parameters of drinking water (chemical and beactrological test) from Govt / NABL approved laboratary all as directed and report to be submitted to office for record. Physio-chemical parameters as per the ground water standards IS-10500-2012 (a) PH, Colour, Electrical conductivity, Turbidity, TDS, TSS, Hardness, Iron, Chlorides, Florides, Calcium, Magnesium, Sulphate, Nitrate, Total alkalinity and Residual free chlorine. (b) Bacteriological parameters as per the ground water standard. NOTE :- testing of water of one bore well shall be treated as one Job. | 10 | Each Job |
| 2 | Construction of brick masonry valve chamber having inner dimension 1000 x 1000 x 1000 mm (suitable for 100mm to 150mm sluice valves & reflux valves) with PCC 1:4:8 type D2 for foundation, brick work wall in cement mortar (1:4), PCC 1:2:4 type B1 for coping, rendering plaster in CM 1:4, 15 mm thick including provision of MS Sheet top cover 3mm thick with welding of MS angle iron of size 25mm x 25mm x 4 mm at edges and in diagonal and angle iron base frame of 50 x 50 x 6 mm, painting with two coats of synthetic enamel paint over a coat of red oxide primer on iron surfaces, lime wash on internal and external cement surfaces and locking arrangements including demolition of the existing chamber, necessary excavation and earth work complete all as specified and as directed. | 2 | Each Job |
| 3 | M&L for dismantling of submersible pumping set of capacity 20 HP to 30 HP installed at various location in AF Stn Memaura , and carrying out necessary repairs to pump and motor, painting of pumping set, reassembling after replacement of following items & jobs and testing to entire satisfaction. Note:- 1. Cost of Transportation (if required) shall be included in quoted rate. 2. Spare parts required will be measured & paid separately here in after under below supply only item: | 1 | Each Job |
| 4 | Supply only Thurst bearing block complete of submersible motor of any make. | 1 | Each Job |
| 5 | Supply Bushes of submersible motor as per manufracture's design and specification. | 1 | Each Job |
6 Days Left