Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4248628 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Repair/ Maint To Roof Treatment Leakage/ Seepage And Internal/external Surfaces Of Zone B Area Of Age B/r-i Under Ge (west) Lucknow |
| Last Date For Submission | 1st Jun, 2026 |
| Opening Date | 03 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 99800.00 |
| Estimated Cost | 4990000.00 |
| City | Lucknow |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M & L for plain cement concrete 1:2:4 type B-0 using 12.5mm graded stone aggregate and mixed with 2% integral water proofing compound as in padding over roof slab, finished surface even and smooth without using extra cement including demolition of Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. NOTE: (i) WPC shall measured and paid seperately. | 100.00 | Cum |
| 2 | Supply only Integral water proofing compound confirming to IS-2645-2003 of approved make complete all as specified and directed | 300.00 | Kg |
| 3 | Providing & laying polymer, water proofing compound & fiber based ready mix plaster for rendering 15 mm thick in CM (1:4) over roof surfaces, finished even & smooth without using extra cement complete as per manufacturer's instructions or as specified by Engineer-in-charge. | 3,000.00 | Sqm |
| 4 | (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Providing and applying fibre reinforced liquid applied elastomeric membrane made of Hybrid PU polymers by self priming with 30% water dilution and let it dry for 4-6hrs. Further apply 2 coats of waterproofing treatment fibre reinforced liquid applied elastomeric membrane made of hybrid PU polymers in a gap of 4-6hrs. The applied material should have specific gravity of 1.25g/cc with minimum recommended coverage of 1sqm/litre to built DFT of 1200 microns. the cured membrane shall exhibit - 1. ) Tensile Strength ASTM D412 : 1.4-2.5 MPa 2.) Elongation ASTM D412 : 400-500% 3.) Adhesion Strength : >2N/sqm as per ASTM D4541 4.) Crack Bridging Ability : >3-4mm as per AS/NZS 4548:5:1999 5.) Water Permeability : NIL as per DIN 1048 (c) Providing and installing non-woven geo-textile membrane 40-50gsm with overlaps of 50mm in both directions over the Ist coat when the surface is still tacky. Note: Total hybrid PU polymer including primer and two coats will appllied @2 Kg/Sqm | 3,000.00 | Sqm |
| 5 | (a) Taking down existing water proofing treatment and cleaning of roof surface by washing and rubbing etc. and removing the retrieved material to a distance not exceeding 500m where directed. (b) Providing and applying fibre reinforced liquid applied elastomeric membrane made of Hybrid PU polymers by self priming with 30% water dilution and let it dry for 4-6hrs. Further apply 2 coats of waterproofing treatment fibre reinforced liquid applied elastomeric membrane made of hybrid PU polymers in a gap of 4-6hrs. The applied material should have specific gravity of 1.25g/cc with minimum recommended coverage of 1sqm/litre to built DFT of 1200 microns. the cured membrane shall exhibit - 1. ) Tensile Strength ASTM D412 : 1.4-2.5 MPa 2.) Elongation ASTM D412 : 400-500% 3.) Adhesion Strength : >2N/sqm as per ASTM D4541 4.) Crack Bridging Ability : >3-4mm as per AS/NZS 4548:5:1999 5.) Water Permeability : NIL as per DIN 1048 (c) Providing and installing non-woven geo-textile membrane 40-50gsm with overlaps of 50mm in both directions over the Ist coat when the surface is still tacky. (d) M&L for machine pressed chequered cement concrete tiles of size 250x250x20mm thick, set, jointed over and including 15mm thick screed in CM 1:4 and pointed in CM (1:3) complete all as specified and directed. | 400.00 | Sqm |
20 Days Left