Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4160225 |
|---|---|
| Organisation Name | Local Self Government Department |
| Tender Brief | Corrigendum : Nh Ke Left Side Sdm Office Ke Paas Block Ka Kary Lunkaransar |
| Last Date For Submission | 11th May, 2026 |
| Opening Date | 11 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 5380.00 |
| Estimated Cost | 269000.00 |
| City | LUNKARANSAR |
|---|---|
| State | Rajasthan |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | work detial | ||
| 2 | Construction of embankment with approved material obtained from borrow pit with all lifts and leads, transporting to site, spreading, grading to required slope and compacting by vibratory roller 8-10 tonne to meet requirement of table 300-2 including cost of compensation for earth taken from private land complete as per MoRT&H specification clause 305. (Lead taken upto 5 km) | 107.50 | cum |
| 3 | Providing and laying lean cement concrete 1:4:8 in Sub-base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, cement content not to be less than 150 kg/ cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in concrete mixer, laid manualy, compacted with surface vibrator, finishing and curing complete as per clause 601, 112 of MoRT&H specification including all material, labour, machinery, lighting, guarding and maintenance of diversion. | 17.00 | cum |
| 4 | Providing and fixing of 60mm thick precast cement concrete interlocking paver block casted with rubber moulds in apporoved reflective colour and design having minimum compressive strength of 300 Kg/ sq cm. The CC paving blocks be laid on average 50mm thick bed of coarse sand and the joint is to be filled with fine sand. Laying procedure on compacted sub-bace as defined. Complete job is to be executed as per the instruction of Enginner incharge. The rates to be inclusive of all lead & Lifts etc. complete as per specifications. | 215.00 | Sqm |
| 5 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. | 200.00 | Kg |
2 Days Left