Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4227596 |
|---|---|
| Organisation Name | Local Self Government Department |
| Tender Brief | Corrigendum : (cheriyamundam Gp (project.no.248/2025-26)-take A Break Renovationn-general Civil Work |
| Last Date For Submission | 18th May, 2026 |
| Opening Date | 18 May, 2026 |
| Document Cost | 555.00 |
|---|---|
| EMD | 3174.00 |
| Estimated Cost | 126973.00 |
| City | Malappuram |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | TAKE A BREAK RENOVATION | ||
| 2 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 8.100 | cum |
| 3 | 4.6.1:Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including the cost of required centering, shuttering complete.1:1 :3 (1 Cement: 1 coarse sand(zone-III) derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources). | 0.081 | cum |
| 4 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 196.810 | kg |
| 5 | OD484298/2025-2026:Providing and fixing precoated galvanised iorn profile sheet (size, shape and pitch of corrugation as approved by Engineer in charge) 0.35 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 meter or as desaired by Engineer in charge. The sheet shall be fixed using self drilling /self tapping screws of size(5.5X55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 15.600 | sqm |
1 Days Left