Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 2787100 |
|---|---|
| Organisation Name | Public Health Engineering Department |
| Tender Brief | Corrigendum : Repairing Of Existing Pipeline And Repair Of Existing Fhtc Connection For Moyna Piped Water Supply Scheme At Gazole Dev. Block Under Malda Division, Phe Dte. In The District Of Malda. |
| Last Date For Submission | 25th Apr, 2026 |
| Opening Date | 27 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 5950.00 |
| Estimated Cost | 297476.00 |
| City | Malda |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Rectification or repairing of existing FHTC connection from C.I./D.I./UPVC/HDPE/G.I./A.C. distribution pipeline with labour cost for cutting trench (1m X 0.9m X 1.2m) carefully without damaging the existing distribution pipe line, (in case of damaged if any pipe line during eexecution, necessary damaged should be repairing by the agency in his own cost) removing carefully old damage / good condition saddle piece, brass/gunmetal and refitting saddle pice and ferrule and all accessories, after connection work filling the trenches by earth all labour work are complete (Excluding all necessary Materials) as per direction of EIC. | 100.00 | /Each |
| 2 | Provision for extra supply and laying of 15 mm NB PVC schedule 80)/20 mm OD HDPE (PE 100, PN 16) pipe with all necessary specials 1.00 meter bellow the ground level including cutting trenches in all sorts of soil and filling up trenches as per direction of the E.I.C. | 385.00 | /Mtr. |
| 3 | Supplying, fitting and fixing alloy iron with brass spindle Bib cock/ Stop cock of approved brand and make, spray painted and tested to 21 kg per sq. cm. (i) 15 mm dia. | 100.00 | /Each |
| 4 | Making Village Road (Avg. 3M width) crossing by Horizontal auger borng for accomodation of laying of avarage 3(three) nos. 15 mm dia pipes for FHTC or as per direction of Engineer-In-Charge. | 60.00 | /Mtr. |
| 5 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) A) For Exposed Work. (i) 15 mm dia. medium quality. | 150.00 | /Mtr. |
31 Days Left