Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5028338 |
|---|---|
| Organisation Name | Water Resources Development Directorate |
| Tender Brief | Repairing And Rewinding Of 17.5 To 20 H.p. 3 Phase 380-400 Volt Induction Motors For Different Rli Scheme Under Malda-iii (a-m) Sub- Division Under Non Plan Programme |
| Last Date For Submission | 31st Jul, 2026 |
| Opening Date | 03 Aug, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 5000.00 |
| Estimated Cost | 227987.00 |
| City | Malda |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling of different H.P 3 Phase 380-400 Volt 1440 RPM, 4/3 pole 50 cycle for induction motors, removing old burnt out coil from slots carefully, segregating all the parts, washing and cleaning the same thoroughly for verification of serviceable and unserviceable parts as per direction of E.I.C. (i)17.5 H.P/ 20 H.P 3 phase induction motor. | 15.00 | Each |
| 2 | Rewinding with approved quality Super Enamel copper winding wire of standard guage as provided by motor manufacturer including slot insulation as per Indian Electrical Rules, shouldering the cable joints properly, taping with 660 V. Grade water proof tape, making new loop terminals heating and vernishing with 'E' class golden vernish (Jhonson & Nicolson make) so as to develop original rated rpm, supplying all necessary materials as mentioned above and reassemblying the motor.17.5 H.P / 20H.P 3 Phase 415 votls, 50 Hz 2 / 4 pole induction Motor (i) Supply of super enamelled dual coated copper wire conforming IS 13730, 1996, part 13 (16 swg to 22 swg) Required max. weight of super enamelled copper wire is given below: 1) Elmeck/G.E.C(New) / Crompton/N.E.C /KRILOSKAR NEW - 10.2kgs. | 153.00 | Kg |
| 3 | Labour charge for rewinding , soldering, heat varnishing, bearing changing, reassemling etc. including supply of all materials excluding bearing as mentioned above complete in all respect as per direction of E.I.C | 15.00 | Each |
| 4 | Painting two coats of both inner & outer portion with best quality synthetic enamel paint (to be approved before use) including smoothing surface by sand paper for removing old paint as per direction of E.I.C. (a) Motor | 15.00 | Each |
| 5 | Testing of repaired motor by contious 8 hrs running on load as per direction of E.I.C. | 15.00 | Each |
10 Days Left