Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4369239 |
|---|---|
| Organisation Name | New Mangalore Port Trust |
| Tender Brief | Restoration Of Galvanized Sheet For Roof At Toilet Block Near Over Flow Shed No.01 And Restoration Of Galvanized Sheet For Roof At West Side Of Platform Area Of Over Flow Shed No.02, Nmpa |
| Last Date For Submission | 11th Jun, 2026 |
| Opening Date | 12 Jun, 2026 |
| Document Cost | 560.00 |
|---|---|
| EMD | 8600.00 |
| Estimated Cost | 363114.00 |
| City | Mangalore |
|---|---|
| State | Karnataka |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Description | ||
| 2 | providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05%) approved by Engineer-in-chare) 05 fotal coated thicknees 50.05 %) total coated thickness with zinc coating 120 g/m2 as per IS 277 in 240 per s: 277, In 240 mpa steel grade, 5-7 microns IS: in epoxy pimer on both side of the sheet and polyester top coat ct 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 m or as desired by Engineerin- charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required | 92.50 | Sqm |
| 3 | providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. | 1360.00 | Cum |
| 4 | Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite / trap /basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed laid in la machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machinery, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:2:4 Using 20 mm nominal size graded crushed coarse aggregates - including Form work/ scaffolding etc., | 1.75 | Cum |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an under coat of of suitable shade with ordinary paint of approved brand and manufacture after thoroughly brooming the surface to remove all dirt, dust, mortar drops and foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour complete | 45.00 | Sqm |
6 Days Left