Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4370077 |
|---|---|
| Organisation Name | INKEL Limited |
| Tender Brief | Construction Of New Hospital Block At District Hospital, Mavelikkara (sh Supply Of Furniture (including Installation)) |
| Last Date For Submission | 4th Jun, 2026 |
| Opening Date | 06 Jun, 2026 |
| Document Cost | 5900.00 |
|---|---|
| EMD | 50000.00 |
| Estimated Cost | 17409268.00 |
| City | MAVELIKKARA |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Furniture | ||
| 2 | Managers table with drawer treated with hardwood: size 1525x760x760 mm | 34.000 | no |
| 3 | Single sided Workstation Table: Supplying, fabricating and installing Single sided Workstation Table of size 600mm width and height ranging 750mm to 800mm and vertical leg support at 1200 mm intervals max. with following specification. 1. Top, leg and front panel: - 24mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. The front panel shall be 100 mm from the outer edge of the table and leg shall be in line with the outer edge. 2. Keyboard tray, CPU stand and footrest of 18mm thick IS 710 BWP marine plywood with hot/Cold press machine lamination of 1mm. Foot rest & CPU stand shall be 100 mm from the floor. 3. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The table should be assembled using a knockdown fittings system. The table shall be tailored to meet the specific requirements/site conditions. The measurement shall be on the basis of table length in running meter. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 195.000 | metre |
| 4 | Pedestal Unit with casters: Supplying, fabricating and installing Pedestal Unit of size 400 mm x 450mm x 700mm with following specification. 1.Panel: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. Drawers: 3 nos with soft close sliders,D handle and multipurpose lock. The bottom panel of the drawers shall be made of 9mm thick IS 710 BWP marine plywood and carcase for the drawers shall be made of 18mm IS 710 BWP marine plywood. 3. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 4. The pedestal should be assembled using a knockdown fittings system. The casters are installed at the four corners for easy movement. The contractor is required to submit shop drawings with all details of material, fittings, colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the engineer in charge and as per the approved list of make | 110.000 | no |
| 5 | Floor mounting storage unit: Supplying, fabricating and installing storage units of varying dimensions, length ranging from 800mm to 2400mm, width 450mm, height ranging from 900 mm to 2100mm with following specification. 1.Panel and door shutter: - 18mm thick IS 710 BWP marine plywood with hot/cold press machine lamination of 1 mm thick. 2. All visible edges shall be covered with 2 mm PVC edge banding and hidden edges with 0.5 mm PVC edge banding. 3. The back panel of the storage unit shall be made of 9mm thick IS 710 BWP marine plywood with 1 mm thick lamination. 4. The hardware includes 90 degree soft close hinges,multipurpose lock & D Handles. 5. The unit shall be assembled using a knockdown fittings system. Measurement shall be based on the facia area. The contractor is required to submit shop drawings with all details of material, fittings,colour etc.to the Engineer in Charge prior to fabrication and all works shall be completed as per the approval from the Engineer in Charge and as per the approved list of make. | 280.590 | sqm |
Ending Today