Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3980241 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Provn Of One High Mast Light 16 Mtr For Trg And Sports Ground At 56 Fd Regt Under Ge (u) Meerut Cantt |
| Last Date For Submission | 9th May, 2026 |
| Opening Date | 15 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 14350.00 |
| Estimated Cost | 715300.00 |
| City | Meerut |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply, errection, Installation , Commissioning& testing of High Mast lights, and high mast lights detail under mentioned Technical data cart part Specification in closed) comprising of the following :- (a) Supply of galvanized Steel mast of 15/16 mtrs high Mast lighting system technical data with the scope of work. (b) Steel mast height 15/16 Mtr (galvanizing std IS 4759 )( Material construction of high mast sheet will be of BSEN 10025 / lS 5986 Gr Fe 510 or equivalent) cross section of mast 20 sided regular polygon & No of parts along length 2 ( Top dia 150 mm (A/F) & bottom dia 360 mm (A/F) (c ) Part 1: 8301 mm (Bottom) thickness 4mm ; Part 2: 8300 mm thickness 3 mm (d) Metal Protection - Hot dip galvanizing internally & externally (e)Thickness of galvanization - average coating 86 microns for > 5mm sheet thickness/65 microns for <5mm sheet thickness (f) Base plate details :- base plate dia : 560 mm, thickness : 25mm (g) Lightning protection finial - 1.2m Galvanized, single spike (h) HD bolts dia 24mm/ HD bolts Nos : 6 / HD bolts 850 mtr long & PCD 460 mm/ HD bolts embedded length as per manufacturer TDS (j) Material construction : 48.3 OD ERW class B Sq pipes or circular pipe with 6 arms (k) Dia of lantern ring - as per head frame design in two halves (l) LED type twin Aviation obs light (cat no ; 108 DD LDR- SEN IP 66 or equivalent) - 01No (m) Wind 2 drum manual and power operated , Speed 50m/sec; terrain category- 2, Class-A, incl 3 phase 415 volts 1.5 HP power tool) | 1.00 | Each |
| 2 | (n) Stainless Steel wire Rope : grade AISI 316, 7/19 Con , dia 6 mm braking load minimum -2350 Kg (o) Fixing of LED ligth 6 to 9 Nos flood light. Note : items has been measure and paid separately (p) Service Wiring feeder to flood light FRLSH , IS- 694 copper cable size 2.5 Sqmm (minimum) x 5 core Note : - (i) Work to be executed as per standard engineering practices and as per manufacturers instruction (ii) Before placing the order the design/ drawing of high mast of there manufacturer shall be got approved by GE (iii) Work to be executed by the manufacturer or there authorized rep and and undertaking of the same from the manufacturer be submitted prior to excution / completion (iv) Size of RCC foundation Shall be carried out as per manufacturers drawings | ||
| 3 | Supply and fixing LED flood light fitting 120W, 230 volt , AC outdoor type with thermal management in multiple optics and equipped with IP 66 protection, with impact and corrosion resistant complete with driver and lamp and install on 15/16 mtr high mast light all as specified and directed. | 8.00 | Each |
| 4 | Earthing complete with galvanised MS earth plate of size 600 x 600 x 6mm thick burried directly in ground not less than 2.25 Mtr below ground level, earth plate packed on all side with charcoal mixed with salt to a thickness of 150 mm in layers, connected by GI earth strip of size 32x6mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion (GI earth strip will be protected by using 40mm bore GI pipe (light grade) from test point to main board. The earthing includes PCC pit chamber, RCC pit cover and frame, watering pipe 20mm bore, funnel with wire mess with necessary earth work including disposal of surplus soil to a distance not less than 50 Mtr etc complete all as specified and shown in electrical plate No 3 of SSR Part-I. | 2.00 | Each Set |
| 5 | Supply, installing, testing and commissioning, factory made and tested . LT feeder pillar box (KIOSK) , outdoor type, (635x500x 230mm) platform mounted, The panel shall be dust and vermin proof, IP 65 class protection and made of 3.15mm CRCA MS sheet and 40x40x4mm thick angle iron frame work, powder coated finish over one coat of red oxide primer outside and two coats of red oxide primer on inside, front opening type, with aprons for cable entry, with double door shutter and locking arrangement (including provn of 65mm Godrej (Freedom) stranded lock with 2 keys, internal wiring with PVC insulated, stranded copper conductor, FRLSH cables, IS-694 marked of adequate size but not less than 10 Sqmm. The following items accomadated this feeder piller incl 2 nos danger notice plate made of 1.6 mm thick mild steel sheet, vitreous enamelled white of size 25 x 20 cm with letter figures and conventional skull bones in signal red colour and fixed nuts, bolts and washers etc with voltage and danger indicated in Hindi and English complete all as specified and directed. The scope of work includes the following items accomadate the same panel:- (i) Stag type,4 way terminal(I/P) 63 Amps - 1 No (PCB 150 ACBC) (ii) MCCB 40Amps 4 pole - 1No (iii) Contactor 3pole 32Amps -1 No (iv) toggle Switch 6Amps - 1 No (v) timer (analogue) with battery backup -1 | 1.00 | Each |
6 Days Left