Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4801052 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair To Certain Roads Under Aor Of Age Br Iv Under Ge (s) Meerut Cantt |
| Last Date For Submission | 5th Aug, 2026 |
| Opening Date | 07 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 175000.00 |
| Estimated Cost | 10000000.00 |
| City | Meerut |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Repair to pot holes any depth n.exc 1 sqm each incl sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths etc cutting around edges to at lest 25mm in depth, making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) and making good by applying tack coat at 5 kg per 10 sq m. putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again will rammed (including supply or premixed macadam, binder and chippings), depth of potholes exc 30mm complete all as specified and directed. | 10.00 | Sqm |
| 2 | M&L for 75mm thick (compacted thickness) WBM, with Lime stone sand stone Flint or Quartzite coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled & consolidated to gradient materials & camber required including scarifying the existing surface exc 50 mm & n.exc 100 mm deep complete all as specified and directed. | 20.00 | Ten Sqm |
| 3 | M&L for Preparation of newly WBM surfaces of roads by brushing with mechanical means, wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying by providing evenly a priming / tack coat with bituminous primer (VG-10) viscosity grade @ 10 Kg per 10 Sqm complete all as specified and directed. | 20.00 | Ten Sqm |
| 4 | Supplying & fixing in repair of retro-reflectorised traffic sign boards by providing and fixing new retro-reflectorised cautionary, mandatory and informatory sign as per ASTM D 4956-04 made of High intensity grade Microprismatic sheeting Type-IV, fixed over aluminium sheeting 2.0 mm thick of size 1400mmx1000mm supported on a Stainless steel of grade 304 Frame comprising of hollow square section of size not less than 25mm. This frame is further welded to hollow circular section of outer dia not less than 50mm size, 2.4 meter high vertical post complete as per drawing. This vertical post shall be embeded in M15 grade cement concrete in a pit of size 300mm X 300mm X 450 mm, 450 mm below ground level complete in all respect as per direction of the Engineer. Note- The rate quoted by the contractor shall be inclusive of forming letters with retro-reflective taping as per the site requirements and all as per the direction of Engineer-in-charge. | 12.00 | Each |
| 5 | M& L for Preparing surfaces by brushing in Black top with mechanical means ,wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bages to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer(VG-10) at the rate 05 kg per 10 sq meterscompleted as pecified and directed. | 2010.00 | Per 10 Sqm |
6 Days Left