Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4052131 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Military Wing Road Of 510 Abw Under Ge (north) Meerut Cantt |
| Last Date For Submission | 19th May, 2026 |
| Opening Date | 26 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 94000.00 |
| Estimated Cost | 4691000.00 |
| City | Meerut |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for preparing the black top surface of roads with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887at a rate of application of 0.2-0.3nkg/Sqm on bituminous surface as spcified in Table 500-5 OF MoRTH specificaction for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface complete all as specified and directed. | 825.00 | Per 10 Sqm |
| 2 | M&L for Premix bituminous macadam paving bitumen any penetrationlaid/rolled and compacted to required gradient and camber (consolidated thickness n. exc 75mm) using 4% binder (Viscosity grade VG 30) with 8 to 12 tone power roller complete all as specified and directed. | 82.50 | Cum |
| 3 | M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg per 10 sq m, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of potholes exc 30 mm complete all as specified and directed. | 5.00 | Per 10 Sqm |
| 4 | M&L for applying evenly a tack coat of Cationic Bitumen Emulsion (RS-1) conforming to IS: 8887at a rate of application of 0.7-1kg/Sqm on bituminous surface as spcified in Table 500-5 OF MoRTH specificaction for road and bridge works 2013, using mechanical sprayer after cleaning of existing surface as specified and directed.. | 5.00 | Per 10 Sqm |
| 5 | M&L for Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5% binder (viscosity grade VG-30) content by weight of total mix, rolled and compacted to required camber and gradient, and laid with mechanical paver and rolled to a uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed. | 825.00 | Per 10 Sqm |
6 Days Left