Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4769198 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Comprehensive Maintenance Of Lt Distribution Network Switchgear Circuit Breaker Lt Panel And Connected Work Under Ge Mis Mhow |
| Last Date For Submission | 25th Jul, 2026 |
| Opening Date | 27 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 64000.00 |
| Estimated Cost | 3200000.00 |
| City | MHOW |
|---|---|
| State | Madhya Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Repairing/overhauling of existing Outdoor type LT panel board/feeder pillar box of any size/type fixed on PCC block including cleaning with compressed air, tightening of all electric connection to the bus bar & switch gears , refixing of loosed doors with proper fixing & locking arrangement & necessary welding work as required and replacement of wornout/ burnt/rusted/ loose lugs , door lock, nut bolt, hing, washers, internal wiring with suitable size (minimum 1.5 sqmm) of PVC copper conductor wire ,repair to PCC work as require at site and including disconnection of all cable from the bus bar and insulating the necked portion of Al/Cu conductor and re-connect the same after repair of panel and proper connection of main earth wire/lead with panel body using lugs complete all as specified and directed by Engr-in-Charge. | 60.00 | Each Job |
| 2 | Repairing/overhauling of existing indoor type LT panel board/bus bar / V-TPN DBs of any size/type fixed on building wall including cleaning with compressed air, tightening of all electric connection to the bus bar & switch gears , refixing of loosed doors with proper fixing & locking arrangement & necessary welding work as required and replacement of wornout/ burnt/rusted/ loose lugs , door lock, nut bolt,hing, washers,internal wiring with suitable size (minimum 1.5 sqmm) of PVC copper conductor wire ,repair to plaster work as require at site and including disconnection of all cable/ sub main from the bus bar and insulating the necked portion of Al/Cu conductor and re-connect the same after repair of panel and proper connection of main earth wire/lead with panel body using lugs complete all as specified and directed by Engr-in-Charge. | 40.00 | Each Job |
| 3 | Dismantling & taking out LT burnt cable ends of any size from transformer/LT panel/LT feeder pillar/ street light pole box/trenches any type/size, for repair/making suitable for reconnection to cable, providing lugs to burnt end of cables, preparing fresh terminals and reconnection, fixing the removed portion of cable with transformer/in trenches/along pole/ panel/feeder pillar box, including excavation of loop & refilling complete using old bricks and sand returning filling the excavated soil complete all as specified and directed by Engr-in-Charge. | 200.00 | Each Job |
| 4 | M&L for dismanteling of old damaged /cracked PCC coping and prepare the new PCC coping for steel/PCC pole using PCC 1:3:6 type D-2 with 20 mm graded stone aggregate making collar above ground level on existing foundation of pole size 450x450x300 mm high and plastering with1:4 cement sand mixter for smooth look incl curing to achieve the strength and breaking/removing existing old damaged coping complete all as specified and directed by Engr-in-Charge. | 35.00 | Each Job |
| 5 | Repair of earth pit including required excavation, earth work and PCC work to make good damaged /disturbed surfaces of earth pit chamber & making new pit cover of RCC 1:2:4 type B1 using 20 mm graded stone aggregate reinforced and lifting handle on RCC cover with 8 mm bars at 150 mm centre to centre both ways incl supply & fixing of wire mess and funnel including re-connection of earth wire/strip with panel/transformer using GI nut, bolts washer complete all as specified and directed by Engr-in-Charge. | 25.00 | Each Job |
6 Days Left