Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3946485 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair Maint Of External Electric Lt Infrastructure Alongwith Connected Items Under Ge Mis Mhow |
| Last Date For Submission | 5th May, 2026 |
| Opening Date | 07 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 20000.00 |
| Estimated Cost | 1000000.00 |
| City | MHOW |
|---|---|
| State | Madhya Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Repairing/overhauling of existing outdoor-type LT panel boards/feeder pillar boxes of any size/type, fixed on PCC blocks, including cleaning with compressed air; tightening of all electrical connections to bus bars and switchgear; refixing of loose doors with proper fixing and locking arrangements, including necessary welding work as required; replacement of worn-out/burnt/rusted/loose lugs, door locks, nuts, bolts, hinges, washers, and internal wiring with suitable size (minimum 1.5 sq mm) PVC insulated copper conductor wire; repair to PCC work as required at site; and including disconnection of all cables from the bus bar, insulating the naked portions of Al/Cu conductors, and reconnecting the same after repair of the panel, along with proper connection of the main earth wire/lead to the panel body using lugs, complete all as specified and directed. | 15.00 | Each Job |
| 2 | Repairing/overhauling of existing indoor-type LT panel boards/bus bars/V-TPN DBs of any size/type, fixed on building walls, including cleaning with compressed air; tightening of all electrical connections to bus bars and switchgear; refixing of loose doors with proper fixing and locking arrangements, including necessary welding work as required; replacement of worn-out/burnt/rusted/loose lugs, door locks, nuts, bolts, hinges, washers, and internal wiring with suitable size (minimum 1.5 sq mm) PVC insulated copper conductor wire; repair to plaster work as required at site; and including disconnection of all cables/sub-mains from the bus bar, insulating the naked portions of Al/Cu conductors, and reconnecting the same after repair of the panel, along with proper connection of the main earth wire/lead to the panel body using lugs, complete all as specified and directed. | 8.00 | Each Job |
| 3 | M&L for preparing doors of existing LT panels/feeder pillar boxes with locking arrangements and gaskets, made of 2 mm thick CRCA sheet, including hinges and necessary welding work, complete all as specified and directed. | 6.00 | Sqm |
| 4 | Checking and identifying defects/fault points in LT/HT cables using a cable fault locator machine or by manual excavation, including taking out bricks from the trench up to the fault point along the cable route and re-laying the same using old bricks/sand, including refilling and making good the surface after rectification of the defect, complete all as specified and directed, for the following cable length:- (a) 0 -200 m | 10.00 | Each Job |
| 5 | (b) 0 - 350 m Note for item No 4.00 and 4.01: The cable fault locator machine, along with all T&P required for identifying the fault location, shall be arranged by the contractor, and the cost thereof shall be deemed to be included in the unit rate for fault detection using the machine or manually as directed by the Engr-in-Charge . | 15.00 | Each Job |
6 Days Left