Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4940192 |
|---|---|
| Organisation Name | Irrigation And Flood Control Department |
| Tender Brief | Corrigendum : Design Installation At Site Testing And Commissioning Of 02 Units Of 03 Cusec Electric Driven Horizontal Pumping Units At Lis Markoot Gurez |
| Last Date For Submission | 7th Aug, 2026 |
| Opening Date | 08 Aug, 2026 |
| Document Cost | 800.00 |
|---|---|
| EMD | 35000.00 |
| Estimated Cost | 1734000.00 |
| City | Multi city |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Design, Manufacture, Supply, Installation, Testing and Commissioning of 03 Cusec Capacity Horizontal Pump with 15 Meter Dynamic Head Coupled to 35 HP Horizontal Sq. Cage Induction Motor through a suitable size coupling along with base frame and foundation bolts as per the design. One unit operational and another one being proposed is a Standby Unit (NPSHA-3.70 Meters) The job includes fitment of already available Suction and Delivery pipes of existing/old Diesel Driven Unit with the new Pump Motor Assembly after proper alignment, welding and cutting jobs including fitment of increaser/reducer/flanges during installation process. | 2.00 | set |
| 2 | Fabrication, providing, fitting of MS foundation bolts T type at the bottom. The bolts shall be fabricated out of 20 mm thick MS round bars and 900 mm long bar. The T piece shall be 150 mm long and shall be welded. The bolts shall be threaded up to 75 mm at the top. Each bolt shall be fitted with nuts and washers of required size. The bolts shall be grouted in the above cement concrete block for fixing of the base frame of the pumping unit. | 2.00 | Job |
| 3 | Supply, Installation and Testing of Priming pump of following specifications: a. Type ------ Monoblock b. Size ------ 80mm x 65 mm c. Head range ------ 15 24 Mtrs. d. Phase, voltage ------ 3 phase 415+/-10% V e. Discharge ------ 9 12 LPS or higher f. Power ------ 05 HP g. Speed ------ 3000 RPM (synchronous) The Job shall include providing/ fitting of all G.I Pipe 80 mm NB C-class (Approx. =20 Rft.), GI pipe 65mm C-class 40ft and fittings like ball valves, Nipples, flanges/sockets, Tees, Elbows/Bends, CI foot valve & other allied fittings as required for installation of the Priming Unit. The job also includes p/f of 7.5HP DOL Starter along with 4.0 Sq. mm cable 30 Mtrs length approx. | 1.00 | Job |
| 4 | Providing, Installation, Testing and Commissioning of Auto Transformer Starter (ATS) Panel suitable for operation of 02 Nos. 35 HP, 415 V, 3 Phase, 50 Hz Squirrel Cage Induction Motors. The panel shall consist of two independent Auto Transformer Starters housed in a common floor-mounted CRCA sheet steel cubicle enclosure, enabling: Independent operation of either Pump No. 1 or Pump No. 2. Simultaneous operation of both pumps during peak irrigation demand. Auto Transformer starting with automatic transition to full line voltage. Auto/Manual operation. Independent protection for each motor. Technical Specifications Motor Rating Quantity: 02 Nos. Rating: 20 HP each Voltage: 415 V 10% Frequency: 50 Hz Phase: Three Phase Full load current approx. 30-35 A per motor Starter Type Auto Transformer Starter with 65 80% tapping. Automatic transition using timer. Panel Construction Floor-mounted, free-standing CRCA sheet steel enclosure. Minimum 14 SWG thickness Powder-coated finish. Protection class: IP54. Incoming 1 No. 125 A, 4 Pole MCCB. Breaking capacity: 36 kA. Copper busbars of suitable rating. For Each Starter Auto Transformer of suitable kVA rating. Three AC-3 duty contactors (Start, Run and Transition). Timer for automatic changeover. Thermal overload relay. Single phasing preventer. Phase sequence relay. Under/Over Voltage protection. Push buttons (Start/Stop). Auto/Manual selector switch. Ammeter with selector switch Metering Digital Voltmeter with selector switch. Digital Ammeter for each motor. R-Y-B indication lamps. ON/TRIP indication lamps. Operation The panel shall permit: Operation of Pump No. 1 only. Operation of Pump No. 2 only. Simultaneous operation of both pumps whenever required during peak irrigation demand. | 1.00 | Job |
| 5 | MCCB Type: Thermal Magnetic MCCB Poles: 4 Pole Voltage: 415 V AC Frequency: 50 Hz Current Rating The actual frame size: 200 AF Adjustable setting 125 200 A Breaking Capacity Icu = 36 kA Ics = 100% Icu Accessories Adjustable thermal setting Adjustable magnetic trip Auxiliary contacts Shunt trip (if required) Rotary operating handle Terminal shrouds Standards IS/IEC 60947-2 compliant | 1.00 | No |
2 Days Left