Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4760806 |
|---|---|
| Organisation Name | Mahanadi Coalfields Limited |
| Tender Brief | Corrigendum : Providing And Fixing Roof Ridges In Electrical, Machine And Har Sections And Replacement Of Old Gutters With New Gutters In Engine Transmission And Rehabilitation Sections At Central Workshop Ib Valley |
| Last Date For Submission | 10th Jul, 2026 |
| Opening Date | 13 Jul, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 12400.00 |
| Estimated Cost | 988051.00 |
| City | Multi city |
|---|---|
| State | Multi State |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Item Description/ Heading | ||
| 2 | Dismantling roofing including ridges, hips, valleys and gutters etc., and stacking the material within 50 metres lead of : G.S. Sheet | 125.00 | Sqm |
| 3 | Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) withZinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer onboth side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screwscomplete :Ridges plain (500-600mm) | 255.00 | metre |
| 4 | Extra for providing and fixing wind ties of 40x 6 mm flat iron section. | 180.00 | metre |
| 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. Note:The Work is to be done at a height of almost 14.00 metre. | 70.00 | Sqm |
3 Days Left