Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3675337 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair Replacement Of Chilled Water Pipe Line Gi Ducting And Connected Items For Ac Plant At Af Stn Nal Under Ge Af Nal |
| Last Date For Submission | 7th Apr, 2026 |
| Opening Date | 09 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 28000.00 |
| Estimated Cost | 1400000.00 |
| City | Multi city |
|---|---|
| State | Multi State |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply and laying in repair of MS pipe , Class 'C' confirming to IS 1239/3589, heavy class, Nominal Dia 100 mm, chilled water piping including necessary fittings viz. bends, tees, reducers, flanges, drain valves, structural support, necessary clamps, vibration isolators duly insulated with nitrile insulation of 19mm thickness complete pipe laid in trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fasteners) with necessary accessories complete all as specified and directed. | 10.00 | RM |
| 2 | Supply and laying in repair of MS pipe , Class 'C' confirming to IS 1239/3589, heavy class, Nominal Dia 80 mm, chilled water piping including necessary fittings viz. bends, tees, reducers, flanges, drain valves, structural support, necessary clamps, vibration isolators duly insulated with PUF insulation of thickness 19mm including chicken wire mesh of size 12.5 mm x 0.51 mm (24 SWG) hexagonal construction, stretched firmly over the insulation along with cement mortar (1:3) . Pipe laid in trenches or on floor / wall / ceiling with clamps, hangers, angles, channels (using anchor fasteners) with necessary accessories complete all as specified and directed. | 110.00 | RM |
| 3 | Supplying, fabrication, installation and testing in repair GSS sheet metal ducting complete with TDF flange rectangular/square duct made out of 'L' shaped hollow profile, duly factory boxed, incl all accessories such as Corner, Cleat, Carriage bolt, EDPM rubber Gasket and appropriate sealant on longitudinal joints etc complete with spliter damper, duct damper, vanes etc fabricated out of galvanised sheet class VII 120gm/ sqm zinc coating conforming to lS 277&IS 655 all as required and as per IS specification , complete with GI nut bolts, supporting Structure etc and as per approved drawings complete all as specified and directed for the following gauges :- Note : 1. The cost is inclusive of duct with reinforcement/ strengthening, air tight joints, incl accessories painting with black colour paint for duct sides behind the grills. 2. The fire retardant gasket shall be used for jointing the ducts. | ||
| 4 | (a) 24SWG | 20.00 | Sqm |
| 5 | (b) 22SWG | 230.00 | Sqm |
6 Days Left