Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3818078 |
|---|---|
| Organisation Name | Madhya Pradesh Power Generating Company Limited |
| Tender Brief | Corrigendum : Repairing And Asphalting Of Road Between Lift Shafts To Ph-i, Internal Road Power House Premises Including Zero Point Near Itma To Guruguda Village At Thp, Mppgcl, Sirmour. |
| Last Date For Submission | 5th May, 2026 |
| Opening Date | 08 May, 2026 |
| Document Cost | 2000.00 |
|---|---|
| EMD | 164600.00 |
| Estimated Cost | 8229000.00 |
| City | Multi city |
|---|---|
| State | Madhya Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | SOR Item No.-4.3(A) - 4.4 - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix. Plant carriage of mixed material by tipper to site, laying in uniform layers with paver in sub- base/ base course on well prepared surface and compacting with vibratory roller to achieve the desired density in accordance to Table No. 400-12, 400-13 and as per clause of section 406 of specifications: Deduction for item No. 4.3 if sensor paver is not used. Rate Rs. 1451-100= Rs. 1351.00 | 160 | M3 |
| 2 | SOR Item No.- 10.3 -Filling Pot holes and patch repairs with Bituminous concrete, 40mm. (Removal of all failed material, trimming of completed excavation to provide firm vertical faces, base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting, trimming and finishing the surface to form a smooth continuous surface, all as per clause 3004.2) (i) for grading I Material | 170 | M3 |
| 3 | SOR Item No.-5.3(ii)(i) - Providing and applying tack coat with cationic bitumen emulsion (RS-!) using emulsion pressure distributor on the prepared bituminous/granular surface cleaned with mechanical broom and as per relevant clauses of section-503 of specifications. (i) @0.25 kg. per Sqm. (normal bituminous surface) | 31440 | M2 |
| 4 | SOR Item No.-5.9(ii) - Open Graded Premix surfacing:- Providing, laying and rolling of open-graded premix surfacing of 20mm thickness composed of 13.2mm to 5.6mm aggregates either using penetration grade bitumen or cut-back or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled roller 8-10 tonne capacity, finished to required level and grades all complete as per clause 510 of specification. (ii) Case II: Open-Graded Premix Surfacing using cationic Bitumen Emulsion. | 31440 | M2 |
| 5 | SOR Item No.-5.11(ii) - Seal Coat: - Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type A and B seal coats all complete as per clause 511 of specification. (ii) Case:- Type B (providing and laying of premix sand seal coat with HMP of appropriate capacity not less than 75 tonnes/hours using crushed stone chipping (aggregate shall pass 2.36mm seal and retained to 180micron sieve) and penetration bitumen of suitable grade all complete as per clause 511 of specification. | 31440 | M2 |
7 Days Left