| 1 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without CB/RCCB/Isolator)8 way , Double door | 1.00 | NO. |
| 3 | Supply, Installation, Testing and Commissioning of 20KVA servo stabilizer Digital Microcontroller Servo Voltage Stabilizer In-door type with fresh dehydrated oil.With protection, complete in all respects.Technical Specifications of 3 Phase Servo Stabilizer:Capacity : 20 KVA, Type : Un-Balanced 4 wire system( with Buck- Boost Transformer)Method of Cooling : Oil Cooled, Phase : 3 Phase, 4 wire, Frequency :50 Hz, Input Voltage : (P-P) 250-460 (P-P), Output Voltage : 415 V +-1%, Efficiency : 98% at full load, Operation Temperature : 45 Degree Celsius above ambientRelative Humidity : Up to 90%, Correction Speed : Up to 35 V/secNo load current : Less than 1.5% of rated currentBBT : CRGO core material 0.23mm thickness Metering : LCD , Analogue or Digital ( as per requirement), Indication : Indicators for phase failure, over-load and over-voltageControls : Auto/Manual Selector Switch, Increase Decrease Toggle Switch for Manual Operation, Output SwitchProtection : Input High and low cut off, Output High and low cut off, Overload, Short-circuit protection, Time Delay Protection, Class of Insulation : A , Fabrication Box Paint : 7 Process Powder Coated, System construction : As per IS 9815Independent Phase Control : Maintain each phase voltage stable irrespective of unbalanced load, Transformer Winding : Copper 99.9% Pure, Duty Cycle : 100%, Container: 14 SWG with Stove enamelled paint, Cable Box : suitable size of cable box with (3 for input, 3 for output and 1 for neutral), Regulator : Toroidal Type, Oil capacity : As requiredPaint : Powder Coated, Color : RAL 7035 (Polyester Powder Coating)System Construction : AS per IS-9815Two years OEM Warranty Period | 1.00 | EACH |
