Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5025697 |
|---|---|
| Organisation Name | Irrigation And Flood Control Department |
| Tender Brief | Design Supply Installation Testing And Commissioning Of 20 Cusec Horizontal Type Pumping Equipment And Allied Items At Lift Irrigation Scheme Shadipora Main Under Ut Capex 2026-27 Of Misd Shadipora. |
| Last Date For Submission | 4th Aug, 2026 |
| Opening Date | 05 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 60000.00 |
| Estimated Cost | 3000000.00 |
| City | Multi city |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Design, manufacture, supply, installation, testing and commissioning of Horizontal Split Casing Pumping Equipment of following Specifications: i) Type :Horizontal Split Casing ii) Discharge of pump: 20 cusec (2040m3/hr) iii) Total Dynamic Head: 09 m iv)Speed: Suitable for direct coupling with =< 1000RPM , 6or 8 Pole, 50 Hz Induction Motor. v) Pump Efficiency: not less than 82% at Duty point vi) Fluid to be handled: Raw Water/ Nallah water vii) No. of stages: Single viii) Duty: Continuous (s1) ix) NPSHA: 4.4 m Material of construction :- Casing: Cast Iron FG260 conforming to IS 210. Impeller: Cast Stainless Steel CF8M conforming to ASTMA 351(SS 316 Grade), Dynamically balanced. Shaft: Stainless Steel SS410 Shaft Sleeve: SS410 or SS 316 Wearing Rings: SS316/ CF8M Bearings : Heavy Duty anti friction bearings with grease lubrication Motor specifications :- i)Rating of motor: Suitable for above parameters (Approx 120HP) ii) Type of Motor: - 3 Phase Squirrel Cage Induction Motor iii)Frequency: 50 Hz +_3% iv)Phase 03 v)Voltage: 415 10% vi)Efficiency: IE3 vii) Rated Speed; =< 1000 rpm (6 or 8 Pole) viii) Insulation Class: Class B or above ix) Enclosure: TEFC, IP55/56 x) Cooling: IC 411 Coupling: A flexible coupling shall be provided to connect the pump shaft to the motor shaft. The coupling shall be of an all-metal type with a flexible metal insert. The entire rotating coupling element shall be covered by a coupling guard. Base Frame: common base frame fabricated out of suitable size M.S channel of rigid construction duly painted is to be provided by the firm. The foundation bolts and other accessories required for installation and successful commissioning of the pumping unit is included in the job. The job further includes P/F of foundation bolts of required dia and length. The job further includes Providing, Fitting, Testing and Commissioning of Swing type flanged MS Foot valveof 500mm along with the strainer. The job includes providing, fitting of nuts, bolts, RI cloth, washers and other consumables required for carrying out the job. | 1.00 | Job |
| 2 | providing, installation, testing and commissioning of 500mm ND MS pipe with (minimum) 6 mm wall thickness for Suction and delivery piping System as per the following technical specifications: 1. Outer Diameter = 512 mm 2. Thickness = 6.00 mm (minimum) 3. Type of welding = ERW 4. Pipe to be manufactured = As per IS 3589 5. Welding of Pipe = End to End on delivery Side 6. Grade of Pipe = Fe 410 The job includes fabrication of MS bends/off sets of the same dia pipe on suction and delivery side of the pump; the delivery pipe is to be connected end to end by the arc welding and the whole suction and delivery pipes shall be applied with steel primer and paint in two coats each of black bituminous paint. | 34.00 | Mtrs |
| 3 | Steel work for Strengthening and support of the 500mm Dia. Suction Pipe line with following steel details: - I. ISMC150 and strip = 10 mts @16.8Kg/m = 168Kgs | 168.00 | Kgs |
| 4 | Fabrication, providing and fitting of 500 mm dia, 12 mm thick MS Flangeson suction/ delivery side pipes. The job includes providing and fitting of nuts and bolts and gaskets also. | 10.00 | Jobs |
| 5 | Supply, Installation Testing and Commissioning at site 120 HP Cubical and pedestal type Fully automatic Star Delta starter. The starter shall comprise of the following equipment and accessories. a) Main Contactor Assembly 185 Amp (01 No). b) Delta Contactor Assembly 185 Amp (01 No). c) Star Contactor Assembly 140 amp (01 NO) d) Thermal overload Relay of with132 220-amp Relay range. e) Double vacuum timer assembly having time range of 0-60/sec. f) Single phase preventer. g) Auxiliary fuse units of suitable Ampere range. h) Electrolytic Copper bus bar strips of suitable size of duly tinned air insulated mounted on suitable size backlit insulators. i) 01 no 3 Phase Digital Ampere meter which indicate 0 to 300 Ampere amperage with required attachments. j) One number 3 Phase Digital voltmeter 0-500 volts. k) On/Off push buttonSwitch s. l) Complete internal wiring of the Control panel for operation of the equipment by using adequate capacity of Single/Multi strand copper wire of standard make. The wiring shall be provided with plastic washers for identification of each wire at various joints. The wiring shall have to complete properly. m) 6 Amp single pole ,10 KA MCB (03 No) n) Cubical Panel fabricated out of 1.5/2.0mm CRCA Sheet with angle 40x5 mm | 1.00 | Job |
14 Days Left