| 1 | Fabrication and erection of a weather protection shed, along with allied works, at Veravali High
Level Reservoir and Veravali Hill Reservoirs No. 1 & 2 under AE WW (M), WS South-II | | |
| 2 | Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated usingM.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion
of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding,grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two cplates, baseplates, bolts in M.T.) | 1.560 | MT |
| 3 | Providing and fixing single skin trapezoidal profiled sheeting 930 - 1020mm cover width 28-32 mm crests depth at 186-250 c/c ( above 195 mm c/c crest distance there will be minimum 2 ribs at the centre for stiffening). The feed material shall be manufactured from AZ 150(min. 150 gms/sq.mt total on both sides) Zincalume / Galvalume sheets of minimum yield strength of 550 MPa, 0.45 mm BMT, ( 0.5 mmTCT excluding paint coating thickness), metallic hot dip coated with AlZn alloy
(55% Aluminium, 43.5% Zinc, 1.5% Si ) as per AS 1397 / IS15961 & painted with
Super Durable Polyester Colorbond steel XRW
or equivalent quality paint system of apporved color, suitable for exterior application conforming to AS/NZS 2728:2007 type-4 / IS15965:class3 of approved
make. The sheet shall have a total coating thickness of 35 microns, super durable
polyester paint systemof 20 microns on exposed surface and 5 micron reverse polyester coat
on back surface over 5 micron primer coat on both surfaces. The paintsystem shall have stable inorganic pigments for color durability. The product will | 162.000 | SQM |
| 4 | Excavation for foundations, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits & general building
works in all types of soils, vegetable earth, soft murum, running sand, shingle, turf clay, loam, peat, ash, shale, slag, chalk, garbage, muddy/
marshy/ slushy soil, marine clay, reclaimed land etc. for depths/lifts upto 1.5M measured from the ground level, including dressing/ trimming the sides, leveling and ramming of bottoms, manual dewatering, removing rank vegetation, backfilling in layers not more than 200mm thickness, watering, consolidating, compacting to achieve
not less then 97% Modified Proctor density conforming to relevant IS, stacking the selected material in measurable heaps for future use within owners space or disposing within an initial lead of 150m as directed, loading, unloading, leveling excluding shoring, strutting etc.
complete as directed by Engineer-in-Charge.
Note:
1) The rate includes the handling/supporting the existing utilities such
as cables, drains, pipes, water mains etc.
2) It also includes the royalty and other taxes applicable if any.
For more details refer General Notes. | 16.000 | CUM |
| 5 | Providing & Laying 150 mm thick dry stone Rubble Soling with average 150 mm size hard stone set in regular lines, handpacked and interstices thoroughly filled with small chips including filling in with good quality murum brought from outside, compacting with iron rammers, watering,
sand spreading 12mm thk. layer of grit on top etc complete as directed by Engineer In Charge.
(Note: The rate includes the royalty and other taxes if any) | 13.000 | SQM |
