| 1 | Part-A (Capex Cost) Supply, installation, testing, and commissioning of a circular equalization/Buffer tank having a minimum effective capacity of 218 m , complete with suitable openings/nozzles for pump inlet and raw water inlet arrangements, including all required manholes, flanges, and fittings.
The tank shall be made of FRP (Fiber Reinforced Plastic)/MS/any suitable material suited for the intended application, and shall include complete civil foundation, supports, anchoring arrangements, and all associated works including excavation work if required, as per relevant standards and site requirements. | 1 | Nos |
| 2 | Supply, installation, testing and commissioning of Electric Motor Driven Horizontal Centrifugal Pump of Capacity 189 m3/hr at 15 m head including drive motor and accessories such as mechanical seal, coupling, guard base frame, foundation bolts, civil foundation etc | 2 | Nos |
| 3 | Supply, installation, testing, and commissioning of all required fittings and appurtenances for Horizontal Centrifugal Pumps, including valves, non-return valves, MS pipes, specials, flanges, gaskets, supports, clamps, and all associated accessories, complete in all respects, as per site requirements. | 2 | Lot |
| 4 | Supply, installation, testing, and commissioning of 415 V, 3-phase VFD control panel suitable for horizontal centrifugal pump, complete with VFD drive, MCCB/ACB, contactors, overload protection, control MCBs, input/output reactors (if required), meters, indications, control wiring, ventilation, and all necessary accessories. | 2 | nos |
| 5 | SITC of online Turbidity and Ammonia Analyzer with sensors at inlet & outlet of Ammonia Removal Plant installed at V-11 Ranney well along with Monitoring software:
User-friendly system operates & analyze every minute without any need of hazardous reagents, chemicals, maintenance, consumables and low calibration requirements.
Features:
Turbidity Analyzer: Plug & measure, No consumables, no moving parts, low power consumption, dual-beam compensated optics, long term stable, 100% corrosion free, mounting and measurement directly in the media, can be mounted directly in a mains pipe/pressure pipe, automatic compensation: dual-beam, Measuring range: 0-800 NTU, accuracy: +/- 2.5%, Operating pressure: 0-8 bar, automatic cleaning, Protection class: IP68,
Ammonia Analyzer: Plug & measure, measuring principle: ISE (ion selective electrodes), long term stable, factory pre calibrated, automatic cleaning, easily & quick mounting and measurement directly in the media or in a flow cell, automatical temperature & potassium compensation, range: 0.2 to 100 mg/l, Accuracy NH4-N: +/- 0.1 mg/l, response time 60 sec, Protection class: IP68.
Display of above mentioned analyzer to be available at site with setup and calibration of all monitoring system, interface to SCADA via 4-20 mA analog outputs, control of cleaning system, digital log book with Online monitoring software for real time reading of both above mentioned analyzers.
Make: Forbes Marshall, Hach, SCAN, ABB, DJB approved | 1 | Set |
