Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4036307 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Road Safety Measures At Chak Avtara (bhatyari) Bishnah Bari Brahamna Road (under Non Plan)(2nd Call) |
| Last Date For Submission | 27th Apr, 2026 |
| Opening Date | 28 Apr, 2026 |
| Document Cost | 600.00 |
|---|---|
| EMD | 2900.00 |
| Estimated Cost | 145000.00 |
| City | Multi city |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and fixing of thermoplastic speed breaker of size 50mmx350mmx50mm made of thermoplastic engineering alloy code AL 1005 including interlocking sub units make it bind perfectly into one long bump.Colour of the material black/yellow and UV stabilizers keep them perpetually colourful), studded with reflectors on either side, they are clearly visible to motorists during night hours bearing capacity of load 50 tonne including all leads and lifts freight charges all complete. | 21.00 | rmt |
| 2 | Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 16.66.2 Cautionary/warning sign boards of equilateral triangular shape having each side of 900 mm support length of 3650mm. | 4.00 | Each |
| 3 | Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. | 60.20 | sqm |
| 4 | Providing and erecting traffic safety ABS back body polycarbonate circular convex mirror with wide angle vision fined of size 800mm brackets along with nuts and bolts mounted on the 50mm dia (medium) G.I pipe with angle size 40x40x6mm welded on the footof pipe of length 300mm. The total length of pipe is 2.20m and embedded in the concrete block of size 450x450x600mm in M-20 or where casting of block is not possible it is fixed with brackets & fasterner on the existing structure. | 1.00 | each |
| 5 | Providing and fixing Glow studs of size 100x20mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite) or HIP (High impact Polystyrene) or ABS having electronically welded micro-prismatic lens with abrasion resistant coating as approved by Engineer-in-charge. The Glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro-reflective surface shall be 35 +/- 5 degrees to base. The reflective panels on both sides with at least 12cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS : 873 part 4 : 1973. The studs shall be fixed to the road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge. | 175.00 | each |
9 Days Left