Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4079577 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Special Repair For Replacement Of Ber Pressure Filter Of Capacity 10,000 Gph And Connected Works At Zakhama Mil Stn |
| Last Date For Submission | 6th May, 2026 |
| Opening Date | 13 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 49000.00 |
| Estimated Cost | 2450000.00 |
| City | Multi city |
|---|---|
| State | Multi State |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L of taking out carefully without damaging existing unserviceable pressure filter of capacity 10000 GPH by removing all water supply inlet and outlet connections/ valves, taking out filter media and spreading/ dumping not more than 500 mtr including shifting and depositing the pressure filter complete alongwith all relevent mountings and accessories to MES Store yard located approx 2 km with the help of hydra and vehicle for further disposal action and complete all as directed. Note: The reqd manpower, tools and plants, transportation etc included in the quoted rate. | 1.00 | Each |
| 2 | Supply, install, testing and commissioning of multigrade pressure sand filter having capacity of 10000 GPH consisting of one vertical cylindrical Mild steel pressure vessel with dished ends. Pressure gauges at inlet and outlet, sample cock, MS Face Piping, CI butterfly valves alongwith all accessories with initial charge of filter media, painting inside with epoxy paint and outside painting with two coats of synthetic enamel paint over two coats of red oxide primer . The detailed technical specifications are as under :- (a) Flow rate : 10000 GPH (b) Vessel Dia : 2800 mm (c) Vessel Height : 1600 mm (d) Shell sheet Thickness : 08 mm (e) Dish thickness : 10 mm (f) One set of 100mm dia nominal bore frontal mild steel pipe for inlet, oulet, backwash and rinse Iine (g) Butterfly valve of 100mm dia : 5 Nos. (h) Pressure gauges 0 to 07 Kg/ Sqm | 1.00 | Each |
| 3 | (i) Filter media. graded media of Particle size as given below shall be filled in layers as per design:- (i) Antracite - 1.4 - 1.5 mm (ii) Sand - 0.4 - 0.8 mm (iii) Sand - 1.02 mm (iv) Gravel - 2.0 -3.15 mm (v) Gravel - 3.15 to 5.6 mm Note:- (i) Design / drawing of the multigrade pressure sand fiter showing the dimension is to be obtained from the authorised OEM Supplier and is to be got approved trom Accepting Officer before placing final order to the manufacturer. (ii) Warranty and test certificates shall be submitted by the contractor to the department. (iii) Necessary foundation as per OEM, erection cost, testing, commissioning & transportation is deemed to be included in the quoted rate. | ||
| 4 | Supply and fixing for 100 mm dia DI. resilient (soft) seated gate valve with pocket less body, ss stem (AISI 410), epdm coated di wedge 100% vaccum tight design with toroidal sealing rings and over 250 micron epoxy coating in PN16 designed to BS:5163/IS:14846 non-rising/rising stem type with hand wheel operation with flanges if required and connnection with existing pipeline with flanges or thread work etc including taking down old unserviceable one complete all as specified and as directed. | 2.00 | Each |
| 5 | Supply and fixing for 100 mm dia DI. resilient (soft) seated gate valve with pocket less body, ss stem (AISI 410), epdm coated di wedge 100% vaccum tight design with toroidal sealing rings and over 250 micron epoxy coating in PN16 designed to BS:5163/IS:14846 non-rising/rising stem type with hand wheel operation with flanges if required and connnection with existing pipeline with flanges or thread work etc including taking down old unserviceable one complete all as specified and as directed. | 2.00 | Each |
12 Days Left