| 1 | Designing, Supply and erection of DG set of capacity 1050 KVA with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 plus (-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge. The rating should be at 1500 RPM.
a) Diesel Engine, b) Alternator c) Battery 24 V. d) Base Plate. e) suitable sq.mm suitable core copper cable upto 40 meters. f) Tools, standard panel g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT`s) h) Metering set 60/5A/110V (Amp. Meter, Volt Meter) i) Overload protection for DC-1 No. j) Battery Charger 24V DC k)Copper bus bar of suitable size l) KWH meter 96 sqmm size m) Starting fuse button and key switch9on/off) n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, Dc control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge` | $1.000 | Each |
| 2 | Designing, Supply and erection of DG set of capacity 750 KVA with noise controlled devices acoustic of suitable rating, testing and commissioning of diesel generating set, radiator cooled, 3 phase, 4 wire, 50 cycles 415 plus (-)1% volts AC alternator coupled directly through a set of flexible coupling on a common MS fabricated base frame with diesel engine complete with suitable size incoming cable from generator to change over/AMF panel, making 2nd incoming cable connection from transformer, outgoing cable connection from changeover/ standard panel, making second incoming cable connection from transformer, outgoing cable connection from changeover / STD panel to incomer of motor starter panel, fenced enclosure with platform for DG sets complete as per following detailed scope and specifications and directions of Engineer-in-charge. The rating should be at 1500 RPM.
a) Diesel Engine, b) Alternator c) Battery 24 V. d) Base Plate. e) suitable sqmm suitable core copper cable upto 40 meters. f) Tools, standard panel g) Metering set 415 VAC-1 set (Amp. meter, Volt Meter, ASS, VSS, Phase Indicator, control fuse, frequency meter, CT`s) h) Metering set 60/5A/110V (Amp. Meter, Volt Meter) i) Overload protection for DC-1 No. j) Battery Charger 24V DC k)Copper bus bar of suitable size l) KWH meter 96 sqmm size m) Starting fuse button and key switch9on/off) n) Indicating lamps for low lubricated oil pressure, high coolant temperature, set running, load on, Dc control and other required accessories complete in all respects to the satisfaction of Engineer-in-charge` | $1.000 | Each |
| 3 | Supply, erection, testing and commissioning of 2000 KVA 11 KV / 0.433 KV, 3 Phase, 50 Hz, Copper wound, off-load tap charging links on HV side including first filling of filtered Dehydrated oil including entire cable network from G.O. switch to H.T metering equipment and from H.T metering to Transformer from transformer to main to L.T panel, earthing, safety equipment, fenced enclosure for transformer, including incoming and outgoing VCB, required H.T./L.T. Cables, ACB 3200 Incomer, Bus Coupler and any other required equipment/work as per site condition complete in all respect as per approved make and directions of Engineer-in-charge complete to the entire satisfaction.
Make - Kirloskar / Crompton / Voltamp / Schneider | $1.000 | Each |
