Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4100024 |
|---|---|
| Organisation Name | Bhabha Atomic Research Centre |
| Tender Brief | Corrigendum : Geotechnical Investigation Including Laboratory Tests And Topography Survey For Proposed Grain Irradiator Site Of Barc At Lasalgaon, Nashik |
| Last Date For Submission | 8th Jun, 2026 |
| Opening Date | 11 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 113540.00 |
| Estimated Cost | 4811000.00 |
| City | Mumbai |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | A. Field Data Studies: Conducting Survey for land and water body using Total Station and other suitable instrument including apex to apex traverse showing all salient features like permanent structures, roads, culverts, nalla, HT lines, telephones, sewer lines, marking trees nos and list of trees, girth type of tree etc. and establishing true North at site as directed by the Engineer and preparation of drawing etc. complete. The fixing of traverse to be done with total station and plane table with conventional method. Taking levels at every 5m c/c grid in the given area and plotting of contours at 0.5 m intervals. Taking invert levels of the existing drains along the length of the drain culvert, inlets, outlets etc complete at 10m interval including rain water, sewer line, chambers and septic tanks and submit a separate drawing for the same showing the top and invert levels. Note: (1) Invert levels of all drains and chambers and their locations shall be clearly marked on the drawing. (2) Seperate drawings shall be provided indicating all invert levels of chambers , sewer &storm water drainage lines. (3) 3 sets of hard copies of the drawings in A0 size sheets shall be submitted alongwith soft copy. | 6 | Per Acre |
| 2 | B. Geotechnical Investigation: Mobilisation and demobilisation of suitable boring plant and all other allied equipments like Minimum 2 boring rigs or as required number of boring rigs to complete the job in time, survey equipments and all other insitu tests equipments and manpower required to complete the scope of this work. | 1 | Job |
| 3 | Setting up of boring rig at each location, only once for each borehole location including moves between borehole position greater than 5 M locating and marking the location on the ground by actual survey, setting up all field test equipments and bringing all personnel to the location, making area good for setting up rig etc. complete. | 9 | Nos |
| 4 | Boring vertically through all kinds of soils, weathered rock and soft rock, boulders, if any met during drilling with suitable and adequate equipment as required for the depth as measured below existing ground level. Note:(1) RQD of 10% and less will be considered as weathered/soft rock. (2) The soft or weathered rock underlying hard rock with thickness greater than 0.5 M will be considered as soft or weathered rock. (3) Core recovery of 20% and less also considered as soft rock at appropriate depth. 4) Bore holes, location, depth as specified in the drawing or as specified by Engineer incharge. | ||
| 5 | 0 m to 10 m. From G.L | 90 | RM |
6 Days Left