Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4014157 |
|---|---|
| Organisation Name | Tata Memorial Centre |
| Tender Brief | Corrigendum : Providing Gi Sheet Shed Outside Porta Cabin Area Near Gate No. 1 For Security Personnel Sitting At Actrec |
| Last Date For Submission | 11th May, 2026 |
| Opening Date | 12 May, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 7591.00 |
| Estimated Cost | 379570.00 |
| City | Mumbai |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing & Fixing Baffle type false Ceiling with Metalworks Blade/ Linear Panels. Durable metal vertical panels in multiple size with swivel attachements. Pre-coated wood-look finishes. Standard sizes shall be 4" depth with 1" width with end caps both field cut and factory applied as applicable. Design pattern to be submitted for approval. Suspension system to be provided with non-corrosive metal or galvanised metal with additional supports. | 25 | Sqm |
| 2 | structural steel work of all types riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including two coats of synthetic enamel paint all complete. | 1550 | Kg |
| 3 | Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with black anticorrosive bitumastic paint of approved brand and manufacture, over and including a priming of ready mixed zinc chromate yellow primer on new work : 100 mm diameter pipes | 80 | Rmt |
| 4 | Painting (two or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer on new work100 mm diameter pipes | 80 | Rmt |
| 5 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 30 | Sqm |
5 Days Left