Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5019758 |
|---|---|
| Organisation Name | Nuclear Recycle Board |
| Tender Brief | Miscellaneous Civil Works For Nrb Mumbai Office At Vikram Sarabhai Bhavan. |
| Last Date For Submission | 1st Aug, 2026 |
| Opening Date | 03 Aug, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 0.00 |
| Estimated Cost | 350000.00 |
| City | Mumbai |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling Aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable surplus material and stacking of serviceable materials within 100 m lead as directed by the Engineer-in-charge | 21.000 | Sq.M |
| 2 | Providing and fixing anodized aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / Z sections and other sections of approved make conforming to IS 733 and IS 1285 fixed with rawl plugs and screws or with fixing clips or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC / neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing / panelling, C.P brass / stainless screws all complete as per drawings and and directions of Engineer-in-charge including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of PVC / neoprene gasket required filling the gaps using silicon grout sealant etc. (fittings glazing and panelling shall be paid for separately) | ||
| 3 | Anodised Aluminium sections (Minimum anodizing thickness of 15 micron) | 120.000 | Kg |
| 4 | Extra for colour anodizing | 120.000 | Kg |
| 5 | Designing, providing and fixing of 4 mm thick approved make and shade Aluminium Composite Metal Panel of approved make cladding at different locations including soffits of over-hangs but excluding aluminium frame work with grids filled in with weather silicon sealant as per the drawings. The ACM panel composition shall be of 0.5 mm thick PVDF coated aluminium sheet + 3 mm thick low density polyethylene virgin resin core + 0.5 mm thick polyester (PVDF) coated Aluminium sheet all complete as per approved shop drawings and specification. (Aluminium frame work will be paid under relevant item) Note : ACMP shall be measured to the actual visible area of the ACP sheet including silicon joints as fixed on site. | 12.000 | Sq.M |
11 Days Left