| 1 | Supply, installation and commissioning and testing of LT panel cubical type CPRI Approved certified suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, floor mounted, outdoor type factory fabricated duly powder coated inside and out side, outer cover made out of 3.15mm thick CRCA sheet, internal cover and partition made out of 2 mm thick CRCA sheet with angle iron 50 mm x 50 mm x 6mm legs of 45 cm long covered from all side with front and back openable, weather proof including suitable rating aluminium bus bar for 3 phase 4 wire system, wiring with suitable size copper cable and embeded in brickwork in CM 1:4 not less than 45 cm above ground level with suitable foundation for fixing panel of required size in ground with nuts, bolts and washer etc. complete comprising of following including taking out the old unserviceable panel complete all as specified and directed.
Incoming :-
(a) ACB 630 Amp 4 pole 50 KA, Manual draw out type with Microprocessor release, Ics=100% of Icu, LCD display, Thermal memory, Zone selectivity, Current & Voltage Measurement, Advance protection, over temperature protection, fault history, V/V and O/V release - 01 No.
(b) Alum bus bar 1000 Amp TPN - 01 Set
(c) Digital Multifunctional meter Showing V, I, PF, HZ etc with suitable CT ratio-01 No.
(d) Indicator lamp LED type (RYB) complete with bakelite fuse fitting- 01 set
Outgoing :-
(a) MCCB 4 pole, 400 Amp, 50 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 02 No.s
(b) MCCB 4 pole, 200 Amp, 25 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 02 Nos
(c) MCCB 4 pole, 125 Amp, 25 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 03 Nos
Note: Contractor will have to produce Purchase voucher, Manufacturer test certifiacte at the time of RAR/FB duly signed by all concerned. | 1 | Each |
| 2 | Supply, installation and commissioning and testing of LT panel cubical type CPRI Approved certified suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, floor mounted, outdoor type factory fabricated duly powder coated inside and out side, outer cover made out of 3.15mm thick CRCA sheet, internal cover and partition made out of 2 mm thick CRCA sheet with angle iron 50 mm x 50 mm x 6mm legs of 45 cm long covered from all side with front and back openable, weather proof including suitable rating aluminium bus bar for 3 phase 4 wire system, wiring with suitable size copper cable and embeded in brickwork in CM 1:4 not less than 45 cm above ground level with suitable foundation for fixing panel of required size in ground with nuts, bolts and washer etc. complete comprising of following including taking out the old unserviceable panel complete all as specified and directed.
Incoming :-
(a) MCCB 4 pole, 400 Amp, 50 KA, 415 volts Adjutable Thermal and Magnetic setting
with Ics = 100 % Icu - 01 No.
(b) Alum bus bar 600 Amp TPN - 01 Set
(c) Digital Multifunctional meter Showing V, I, PF, HZ etc with suitable CT ratio-01 No.
(d) Indicator lamp LED type (RYB) complete with bakelite fuse fitting- 01 set
Outgoing :-
(a) MCCB 4 pole, 315 Amp, 36 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 01 No.
(b) MCCB 4 pole, 200 Amp, 25 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 02 Nos
(c) MCCB 4 pole, 125 Amp, 25 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 06 Nos
Note: Contractor will have to produce Purchase voucher, Manufacturer test certifiacte at the time of RAR/FB duly signed by all concerned.
| 1 | Each |
| 3 | Supply, installation and commissioning and testing of LT panel cubical type CPRI Approved certified suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, floor mounted, outdoor type factory fabricated duly powder coated inside and out side, outer cover made out of 3.15mm thick CRCA sheet, internal cover and partition made out of 2 mm thick CRCA sheet with angle iron 50 mm x 50 mm x 6mm legs of 45 cm long covered from all side with front and back openable, weather proof including suitable rating aluminium bus bar for 3 phase 4 wire system, wiring with suitable size copper cable and embeded in brickwork in CM 1:4 not less than 45 cm above ground level with suitable foundation for fixing panel of required size in ground with nuts, bolts and washer etc. complete comprising of following including taking out the old unserviceable panel complete all as specified and directed.
Incoming :-
(a) MCCB 4 pole, 315 Amp, 36 KA, 415 volts Adjutable Thermal and Magnetic setting
with Ics = 100 % Icu - 01 No.
(b) Alum bus bar 500 Amp TPN - 01 Set
(c) Digital Multifunctional meter Showing V, I, PF, HZ etc with suitable CT ratio-01 No.
(d) Indicator lamp LED type (RYB) complete with bakelite fuse fitting- 01 set
Outgoing :-
(a) MCCB 4 pole, 250 Amp, 36 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 02 Nos.
(b) MCCB 4 pole, 200 Amp, 25 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 01 No.
(c) MCCB 4 pole, 125 Amp, 25 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 03 Nos
Note: Contractor will have to produce Purchase voucher, Manufacturer test certifiacte at the time of RAR/FB duly signed by all concerned.
| 1 | Each |
| 4 | Supply, installation and commissioning and testing of LT panel cubical type CPRI Approved certified suitable for 415 volts 3 phase 4 wire, 50 Hz AC supply system, floor mounted, outdoor type factory fabricated duly powder coated inside and out side, outer cover made out of 3.15mm thick CRCA sheet, internal cover and partition made out of 2 mm thick CRCA sheet with angle iron 50 mm x 50 mm x 6mm legs of 45 cm long covered from all side with front and back openable, weather proof including suitable rating aluminium bus bar for 3 phase 4 wire system, wiring with suitable size copper cable and embeded in brickwork in CM 1:4 not less than 45 cm above ground level with suitable foundation for fixing panel of required size in ground with nuts, bolts and washer etc. complete comprising of following including taking out the old unserviceable panel complete all as specified and directed.
Incoming :-
(a) MCCB 4 pole, 250 Amp, 36 KA, 415 volts Adjutable Thermal and Magnetic setting
with Ics = 100 % Icu - 01 No.
(b) Alum bus bar 400 Amp TPN - 01 Set
(c) Digital Multifunctional meter Showing V, I, PF, HZ etc with suitable CT ratio-01 No.
(d) Indicator lamp LED type (RYB) complete with bakelite fuse fitting- 01 set
Outgoing :-
(a) MCCB 4 pole, 200 Amp, 36 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 02 Nos.
(b) MCCB 4 pole, 125 Amp, 25 KA, 415 volts Adjutable Thermal and Magnetic setting with Ics = 100 % Icu - 02 Nos
Note: Contractor will have to produce Purchase voucher, Manufacturer test certifiacte at the time of RAR/FB duly signed by all concerned. | 1 | Each |
| 5 | Supply, Fixing , Commissioning and testing of CPRI approved outdoor cubical type LT bus bar box suitable for 415 V, 3 Phase , 4 wire 50 Hz , AC Supply system fabricated from MS sheet supported with legs of 45cm long made of iron angle 25x25x4mm thick totally encloused ,dust, weather & vermin proof, 3.15mm thick for outer shell and 2 mm thick for inner shell having MS section not less than 50x50x6 mm thick having TPN aluminium busbar of capacity 400 Amps mounted on porcelain insulator duly drilled hole for cable connection including front and rear side opening with locking arrangement with Digital Multifunctional meter Showing V,I, PF , HZ etc with suitable CT ratio also with MCCB 4P 250 Amp, 36 KA, 415 Volts 50 Hz with adjustable thermal and adjustable magnetic setting and provn for incoming and outgoing cables with glands including control wiring with minimum 2.5 sqmm PVC insulated copper conductor for measuring of voltage, amp with indicators RYB ,painting with two coat of smoke grey synthetic enamel paint over a coat of red oxide primer, complete including taking down old unserviceable one complete all as specified and directed.
Note:- (i) Bus bar box shall be mounted on brickwork in CM 1:4 not less than 30 cm above ground level with suitable foundation, rendering 15 mm in CM 1:6 and two coats of cement base paint and the rates shall be inclusive in the quoted rate.
(ii) Contractor will have to produce Purchase voucher, Manufacturer test certifiacte at the time of RAR/FB duly signed by all concerned. | 2 | Each |
