Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4888197 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Miscellaneous Repairs To Water Proofing Treatment, Leakage, Seepage For Certain Bldgs As Part Of Dry Restoration And Eco-friendly Asset Management (dream) In The Area Of Age B/r (c) Under Ge Deolali |
| Last Date For Submission | 12th Aug, 2026 |
| Opening Date | 19 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 123000.00 |
| Estimated Cost | 6500000.00 |
| City | Nashik |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for taking down carefully existing unserviceable bituminous felt (any number of layers) including plastered lime or cement concrete of any thickness up to the Mother slab and cleaning of the surface of roof trenches including flashing and junction parapets kerb walls PCC fillets benching etc with wire brushes and removing of the rubbish to a distance not exc 1.5 KM and depositing where directed at a level not exc 1.5 mtrs above the starting point complete all as specified. | 1500.00 | Sqm |
| 2 | M &L for providing 50 mm thick plain cement concrete 1:2:4 type B-1 (using 12.5 mm graded stone aggregate) Finishing cement concrete surface even and smooth using extra cement for filleting, benching, coving of chajjah top/junctions, padding concrete below roof treatment etc slightly rounded or chamfered on edges wherever required including necessary form work / moulds etc complete all as specified and as directed . Note: Water Proofing compound shall be measured and paid separately. | 500.00 | Sqm |
| 3 | M&L Water proofing treatment to RCC roof slab and shall be carried out as specified below all as specified and directed :- (a) 10 mm thick screed bed in CM 1:3 on concrete surfaces of roof slab and parapets mixed with and including WPC @ 3% by weight of cement; finished even and smooth without using extra cement . (b) The roof surface shall be thoroughly wire brushed, cleaned to eliminate all sharp projection washed dried up and cleaned of all foreign matter and dust to receive primer. (c) Applying bituminous primer on cleaned surface @ 0.40 Lit/sqm. (d) Providing APP polymer modified approved membrane 3mm thick, non woven, polyster, weighing not less than 3.6 Kg/Sqm and laying on roof surface and parapets with laps, overlaps and sealing joints as specified and applied completely by torch application method, the overlap of membrane while torching shall be kept 100mm on length wise and 100 mm width wise (e) Carrying out test by flooding water for 24 hrs for leakages & seepages and rectifying the leakages / seepages / defects, if any, to the entire satisfaction of GE. (f) M&L Finally applying a coat of solar reflective bituminous aluminium paint @ 0.15 liter/Sqm on the top of membrane surfaces complete all as specified & directed. (g) The treatment shall be carried out as per manufacturers instructions and through authorised applicator of manufacturer. Note:- The contractor shall furnish the following before and during progress of water proofing work:- (i) Quality confirmation from the manufacturer of the product alongwith quantity supplied. (ii) Manufacturer test certificate. (iii) The result, if tested in any of the independent laboratory or testing if ordered by GE and the testing charges shall be borne by the contractor. | 1500.00 | Sqm |
| 4 | M & L providing and applying the plaster with single component ready to use repair mortar (SMART CARE REPAIR MORTAR or equivalent) and applying 15 mm average thickness in single layer and finishing with trowel with a bond coat SBR polymer and modified cementious bond coat @ 2.2 kg /Sqm of surface area including taking down existing roof treatment of any type and also taking down cement plaster or PCC padding of any layer etc brick/concrete surfaces, including raking out joints, hacking for key, scrubbing down with water etc., to receive further treatment, complete all as specified and as directed. Make: Asian Paints or equivalent in Sikka, Fosroc and STP Ltd. Note : (i) The application shall be executed on any type of surface and on horizontal/Vertical area (ii) The work shall be executed through authorised applicator of manufacturer only. (iii) Authrised Applicator shall be approved by GE before starting of work. (iv) All materials shall be procured directly form manufacturer. (v) The purchase voucher shall be produced to the Engineer-in-Charge for verification of material. | 300.00 | Sqm |
| 5 | M & L providing and applying Smartcare Dampproof Ultra, a fibre reinforced elastomeric liquid water proofing membrane formulated with reinforcing acrylic fibers having Sun Reflectivity Index (SRI) of 105 on horizontal/vertical surfaces of roof/wall/chajjas in multiple coats @ 2.0 litre/sqm to achieve a seamless waterproofing layer. Primary coat is self-priming coat of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1, damp proof : water) and other coats to be applied undiluted. The coating needs to be reinforced with needle punched non woven Geotextile with minimum weight 50 GSM, to sandwiched between 2nd & 3rd coat of coating. The application shall be carried out after scrapping and properly cleaning the surface with mechanical grinder to remove loose particles dust vegetations etc complete with wire brushes and filling the depressions and cracks with crack seal and crack repair mortar and sealing around the spout pipes GI pipes any size in all respect as per the direction of Engineer-in-Charge. Make: SmartCare Damp Proof ultra of Asian Paints or equivalent in Berger/ Nerolac/STP Ltd. Notes: (i) The work shall be executed through authorised applicator of manufacturer only. (ii) Authrised Applicator shall be approved by GE before starting of work (iii) All materials shall be procured directly form manufacturer/authorised dealer. (iv) The purchase voucher shall be produced to the Engineer-in-Charge for verification of material. | 300.00 | Sqm |
6 Days Left