Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4572166 |
|---|---|
| Organisation Name | Bharat Heavy Electricals Limited |
| Tender Brief | Corrigendum : Framework Agreement For Supply Of Tmt In Q2 Of Fy 2026-27 |
| Last Date For Submission | 24th Jun, 2026 |
| Opening Date | 24 Jun, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 0.00 |
| Estimated Cost | 0.00 |
| City | Noida |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Customer-01-TMT 8 mm IS 1786 Fe500/500D | 35 | MT |
| 2 | Customer-02-TMT 8 mm IS 1786 Fe500/500D; TMT shall be conforming to IS 1786 and IS 13920. Minimum Elongation shall be 14.5 % and Ratio of Ultimate Stress to 0.2 % proof stress should be in the range of 1.15 to 1.25; Steel shall be only of strength grades with minimum 0.2% proof stress of 500 MPa, in addition to other requirements of IS 1786. The actual 0.2% proof stress of steel bars based on tensile test must not exceed their characteristic 0.2% proof stress by more than 20% | 865 | MT |
| 3 | Customer-03-TMT 8 mm IS 1786 Fe500/500D; TMT shall be conforming to IS 1786 and IS 13920. Minimum Elongation shall be 14.5 % and Ratio of Ultimate Stress to 0.2 % proof stress should be in the range of 1.15 to 1.25; Steel shall be only of strength grades with minimum 0.2% proof stress of 500 MPa, in addition to other requirements of IS 1786. The actual 0.2% proof stress of steel bars based on tensile test must not exceed their characteristic 0.2% proof stress by more than 20% | 80 | MT |
| 4 | Customer-08-TMT 8 mm IS 1786 Fe500/500D (Corrosion resistant Grade suitable for Marine construction with micro alloying combination Cr+Cu>0.4%) | 38 | MT |
| 5 | Customer-09-TMT 8 mm IS 1786 Fe500/500D (Corrosion resistant Grade suitable for Marine construction with micro alloying combination Cr+Cu>0.4%) | 300 | MT |
3 Days Left