Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4962371 |
|---|---|
| Organisation Name | New Okhla Industrial Development Authority |
| Tender Brief | Strengthening Of Road (p/l Dbm Re-surfacing Of Road And Other Miscellaneous Work Yamuna Bridge To Shahdra Drain) Noida |
| Last Date For Submission | 29th Jul, 2026 |
| Opening Date | 30 Jul, 2026 |
| Document Cost | 5310.00 |
|---|---|
| EMD | 312000.00 |
| Estimated Cost | 15597777.00 |
| City | Noida |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Cleaning existing painted surface and laying premix in patch repair with 10-20 mm size graded stone grit mixed with bitumen (80/100) VG-10 @50 kg/cum over a tack coat of bitumen (80/100) VG-10 @ 1.00 kg/sqm including heating the grit and maxphalt to the required temperature and mixing either in mixture or in hand drum, rolling with road roller 8-10 tonne as required with all labours, materials T & P etc. all complete. | 17.00 | cum |
| 2 | Providing and applying tack coat using hot straight run bitumen of grade VG - 10, including heating the bitumen, spraying the bitumen with mechanically operated spray unit fitted on bitumen boiler, cleaning and preparing the existing road surface as per specifications : On bituminous surface @ 0.50 Kg / sqm | 7,865.00 | Sqm. |
| 3 | Dense Graded Bituminous Macadam Grading 2 Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects. | 394.00 | Cum. |
| 4 | Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. (Considering bitumen using 10.2% as per MORTH specification. 40 mm thick | 7,865.00 | sqm |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (Zone-III) : derived from natural sources: 4 graded sone aggregate 20 mm nominal size derived from natural sources). | 90.00 | Cum. |
13 Days Left