Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3999336 |
|---|---|
| Organisation Name | New Okhla Industrial Development Authority |
| Tender Brief | Strengthening Of Road (providing And Laying Dbm And Bc On The Service Road Of Kailash Road Between Sector-66-71 And Sector-67-70 (towards Sector-66 And 67) And Mastic Work At The Xing And Covering The Drain) Noida. |
| Last Date For Submission | 27th Apr, 2026 |
| Opening Date | 28 Apr, 2026 |
| Document Cost | 5310.00 |
|---|---|
| EMD | 267000.00 |
| Estimated Cost | 11293625.00 |
| City | Noida |
|---|---|
| State | Uttar Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom.On bituminous surface @ 0.25kg/sqm to 0.30 kg/sqm | 13555.00 | sqm |
| 2 | Providing and laying dense graded Bituminous macadam with higher capacity batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required garade, level and alignment , rolliong with smooth wheeled , vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. | 245.00 | cum |
| 3 | Providing and laying Bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading premixed with bituminous binder @ 5.4per cent of mix and filler, transporting the hot mix to work site , laying with a hydrostatic paver finisher with sensor control to the required garade, level and alignment , rolliong with smooth wheeled , vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. | 400.00 | cum |
| 4 | Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702, prepared by using mastic cooker and laid to required level and slope, including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximate spacing of 10 cm centre to centre in both directions, pressed into surface protruding 1 mm to 4 mm over mastic surface 40 mm thick | 650.00 | sqm |
| 5 | Construction of granular sub-base by providing close graded Material, Spreading in Uniform Layers with Motor Grader on prepared surface , mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density , complete as per clause 401 | 42.00 | cum |
13 Days Left