Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4048131 |
|---|---|
| Organisation Name | Irrigation Department |
| Tender Brief | Corrigendum : General 2025 26 Cpp Kkps Electrical Rehabilitation Of Kunnamkattupathi Regulator Under Irrigation Division Chittur Palakkad Electrification General Electrical Work |
| Last Date For Submission | 6th May, 2026 |
| Opening Date | 08 May, 2026 |
| Document Cost | 2760.00 |
|---|---|
| EMD | 42998.00 |
| Estimated Cost | 1719939.00 |
| City | Palakkad |
|---|---|
| State | Kerala |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | PANEL BOARDS AND CABLING WORKS | ||
| 2 | 90.14.1.2:Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623. Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 1.6mm CRCA sheet, powder coated (excluding base frame) | 60.000 | sqm |
| 3 | 90.14.2.1:Supply and providing 2mm SMC sheet as shrouding for bus interconnection / terminations etc. including required nut & bolt etc. | 5.000 | sqm |
| 4 | 90.14.3.1:Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet | 110.000 | metre |
| 5 | 90.14.4:Supply and fabrication conveyance and installation of base frame of panel board using 75 x 40 mm rolled steel channel (ISMC) | 10.000 | metre |
6 Days Left