Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4643798 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Corrigendum : Construction / Establishment Of 50 Bedded Critical Care Block And Diphl At Civil Hospital Dehra , Tehsil Dehra , Distt. Kangra (h.p.) |
| Last Date For Submission | 25th Jun, 2026 |
| Opening Date | 25 Jun, 2026 |
| Document Cost | 2000.00 |
|---|---|
| EMD | 119600.00 |
| Estimated Cost | 5980389.00 |
| City | Palampur |
|---|---|
| State | Himachal Pradesh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Providing, fixing, testing and commissioning of MS air cushion tank on top of each riser fabricated form 6mm thick MS plate, 250mm in diameter and 1.2 m in height with dished ends fabricated from 8mm thick MS plate with Air release valve with stop cock, flanged inlet connection and drain arrangement with 25mm dia valve, pressure gauge with gun metal stop cock complete with all accessories as required in all respect and to the best satisfaction of Engineer-in-Charge.Make: Fabricated Items | 3 | Each |
| 2 | Providing, fixing, testing and commissioning of Perched air vessel (size 450 mm dia & 2000 mm height) for pressurization of hydrant / sprinkler system complete with adequate pressure switches (as per design / requirement) with valves to operate as per operating sequences including 25 mm dia drain valve, air release valve with stop cock on the top, minimum 50 mm dia inlet with isolating valve duly painted from inside and outside with two coats of synthetic enamel paint over a coat of primer complete as required and Suitable cement concrete foundation with plaster, along with all neccessory floor supporting stand and foundation arrangement.(Vessel should be suitable for rated working pressure) as required complete in all respects and to the best satisfaction of Engineer-in-charge.Make: Fabricated Items | 1 | Each |
| 3 | Providing, laying, jointing, testing and commissioning of following sizes of MS 'C' Class (Heavy duty) pipes conforming to IS-1239 with all fittings (standard MS fitting with welded joint shall be used on the pipes) including tees, elbows, reducers, union, flanges, rubber gaskets, GI nuts bolts, washer including supporting/fixing the pipe on floor / wall /ceiling with clamps, hangers (using anchor fastners) as per specification. including cutting holes and chases in brick, RCC work and making good the same to original conditions complete in all respects. All hangers, clamps, brackets etc. shall be of iron unless specified otherwire and then supply of the same shall also be included for rates under this head. Welding of any kind on the galvanized support / hanger shall not be permitted including synthetic enamel paint of approved shade over a coat of zinc primer.Priorto application of primer the surface should be cleaned dirt,rusts,rough substance etc. as required complete in all respects and to the best satisfaction of Engineer-in-charge. | ||
| 4 | 25 mm dia pipe | 517 | Per Meter |
| 5 | 32 mm dia pipe | 492 | Per Meter |
2 Days Left