Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4821466 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repairs To Certain Road And Replacement Of Road Side Furniture At Af Stn Singarsi Under Age I Af Singrasi |
| Last Date For Submission | 6th Aug, 2026 |
| Opening Date | 08 Aug, 2026 |
| Document Cost | 1000.00 |
|---|---|
| EMD | 137500.00 |
| Estimated Cost | 7500000.00 |
| City | PANAGARH |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | M&L for repair to potholes any depth n.exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 30 mm in depth, making good by applying tack coat with bitumen primer @ 5Kg per 10 Sqm (VG-10), using paving bitumen 80/100 putting premix bituminous macadam, well rammed & sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cu m of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings). depth of pot holes exc. 30mm all as specified and directed by Engr-In Charge | 5.00 | Ten Sqm |
| 2 | M&L for preparation of old bituminous/black top Surfaces by brushing with Wire Brushes for removing Caked, Mud,Road marking etc, Sweeping with Brooms and finally Fanning the Cleaned Surface with Gunny Bags to remove all loose Dirt's and removing all types of raised cat's eye retro reflective , complete all as specified and as directed. | 1030.00 | Ten Sqm |
| 3 | M&L for applying evenly a priming/tack coat with Paving bitumen bituminous primer (VG-10) @ 5 Kg per 10 Sqm with paving bitumen complete all as specified and directed by Engr - in - Charge. | 1044.00 | Ten Sqm |
| 4 | M&L for premix bituminous macadam laid/rolled and compacted to required gradient and camber (Consolidated thickness 75 mm or less) using paving bitumen VG-30 grade as binder minimum 4% by weight of total mix complete all as specified and as directed. Note :- If the requirement of bitumen as per design mix is more than 4% the same shall be provided by the contractor at no extra cost to the Govt. | 7.00 | Cum |
| 5 | M&L Bituminous premix semi dense asphaltic concrete (SDAC) 40mm consolidated thickness with 5.5% binder content of grade VG-30 by weight of total Mix, rolled and compacted to required camber and gradient complete using hot mix plant and machanical paver rolled with 8 to 12 tonne power roller complete all as specified and as directed. Note :- (i) Premix SDAC shall be procured from a Hot Mix Plant (ii) Exact quantity of binder to be used shall be ascertained by Design Mix. (iii) Minimum of 5.5 % of binder shall be used. However in case more than 5.5% of binder content is required as per design mix the same shall be provided by the contractor at no extra cost. (iv) Bitumen content and density testing equipment should be readily available at site during work. (v) The design mix shall be prepared by any Govt Engg College/NIT/IIT and the same shall be approved by AGE(I) and the quoted rate shall be inclusive of the same. | 1030.00 | Ten Sqm |
6 Days Left