Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4411111 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Special Repair To Ber Em Items At Af Stn Purnea Under Ageiafpurnea |
| Last Date For Submission | 24th Jun, 2026 |
| Opening Date | 26 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 20000.00 |
| Estimated Cost | 970000.00 |
| City | PANAGARH |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Fixing only Industrial heavy duty exhust fan/wall mounted fan in replacement of MS body of any size and capacity with louvers as specified & directed. Note : (i) Item to be provided by MES as Sch 'B' Stores (ii) Necessary T&P, Ladder and transportation cost from MES store Yard to specified location deemed to be included in quoted rate. (iii) Fixing to be done by expert technician only. Any damage cost to the item during fixing to be borne by contractor only. | 24.00 | Each |
| 2 | M & L for Cutting opening in cement concrete walls (any description) for exhust fan and other openings (with or without reveals) or enlarging existing openings, including trimming surfaces to receive rendering, etc. | 1.00 | CUM |
| 3 | Fixing only of Hi Wall split type Air conditioners of any capacity complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU) i/c drain pipe including making holes on wall and providing mounting bracket as directed & specified. Note : (i) Item to be provided by MES as Sch 'B' Stores (ii) Necessary T&P, Ladder and transportation cost from MES store Yard to specified location deemed to be included in quoted rate. (iii) Fixing to be done by expert technician only. Any damage cost to the item during fixing to be borne by contractor only. | 16.00 | Each |
| 4 | Fixing only electric water heater storage type steel body and any capacity , including drilling & making hole on wall and fastnut of suitable size & bearing load capacity complete with fixing all accessories such as safety valve, thermostate, NRV, connection piece etc. as directed & specified Note : (i) Item to be provided by MES as Sch 'B' Stores (ii) Necessary T&P, Ladder and transportation cost from MES store Yard to specified location deemed to be included in quoted rate. (iii) Fixing to be done by expert technician only. Any damage cost to the item during fixing to be borne by contractor only. | 15.00 | Each |
| 5 | Supplying, installation, testing and commissioning of 100 KVA capacity (continuous loading) BEE 3 Star rated (Corresponding Level as per BIS amended upto date of receipt of tender) , 11/0.433 KV step down, 3 Phase, 50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better, suitable for out door/indoor applications with Offload Tap Changer in range of 7.5% in steps of 2.5%, having cable end boxes on HV side suitable for 3x300 sq.mm XLPE cable of 11 KV grade, including bus trunking arrangement on LV side including supplying and laying of copper conductor multicore control cable from transformer to HT breaker/panel for safety tripping, complete with all accessories and safety provisions as per relevant IS Code including first filling of filtered dehydrated oil, i/c supplying and grouting of suitable M.S. Channel with all accessories and transformer shall be confirming to IS : 2026 (Part 1 to Part 5), IS : 1180 and as per MES specifications complete in all respects etc as required at site. The maximum flux density in any part of the core and yoke at rated voltage and frequency shall be such that the flux density with + 12.5 percent combined voltage and frequency variation from rated voltage and frequency does not exceed 1.9 Tesla. The permissible temperature-rise shall not exceed 35 C for oil and 40 C for winding. Inside of tank shall be painted with varnish or liquid resistant paint. For external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. IS: 1180 (Part 3) shall be referred to for paint thickness for normal to medium corrosive atmosphere. For highly polluted atmosphere and special application external paint work shall be as per direction of Engineer-in-Charge | 1.00 | Each |
6 Days Left