Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4384298 |
|---|---|
| Organisation Name | West Bengal Electronics Industry Development Corporation Limited |
| Tender Brief | Corrigendum : Webel/ Eot/w/26-27/000024 |
| Last Date For Submission | 12th Jun, 2026 |
| Opening Date | 15 Jun, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 3000.00 |
| Estimated Cost | 247692.00 |
| City | Parganas |
|---|---|
| State | West Bengal |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Description | ||
| 2 | Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premiumgrade asphalt , specially reinforced with non-woven polyester core withpolyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused usingLPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall bemade on the basis of finished surface area. Membrane Property:Softening Point > 150 deg C, Cold Flexibility < -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N:) 300 (longitudinal), 200 (transverse). | 100.00 | SQM |
| 3 | Exposed False-ceiling Work Supplying, fitting & fixing High Pressure steam Cured Non Asbestos fibre cement standard ceiling board (Density > 1300Kg per Cu.m. ) of size595mm X595mm conforming IS 14862 and type B, catagory III of ISO 8336, tested as per AS-1530 Part 3 and BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge False ceiling with 6mm thick Fibre Cement Standard ceiling board. | 55.00 | SQM |
| 4 | Supplying, fitting and fixing steel rolling shutter profile type with 18 B.G of approved type steel latche section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with lockingarrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete | 8.00 | SQM |
| 5 | Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats andstrainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials inlcuding the cost of silicon sealant labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge (Mode of payment is on finished surfacearea of ACP) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating) | 3.00 | SQM |
10 Days Left