Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 3747383 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Annual Repair And Maintenance Of Sru Dalhousie |
| Last Date For Submission | 14th Apr, 2026 |
| Opening Date | 16 Apr, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 34540.00 |
| Estimated Cost | 1727800.00 |
| City | Pathankot |
|---|---|
| State | Punjab |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling of wall or ceiling boards (fibre,pulp, insulation etc.) or insulation boards/slabs/blankets, any thickness including cover fillets as per direction of the Engr- in Charge. | 120.00 | Sqm |
| 2 | Providing & fixing false ceiling with semi perforated 12mm thick at all heights with GRS (Glass Fiber Reinforced Gypsum) false ceiling tile of size 595X595 mm of approved texture ,design and pattern having moisture content less then 2 %, humidity resistance of 99%,NRCO .50 to 0.75 as per IS 8225 :1987, Noncmbustiible as per IS 476 (part 4)-1970 and light reflectance of 855 (minimum) to be laid in true horizontal level suspended on interlocking metel T grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @120 gms per sqm including both side) comprising of main T runners of size 15X32 mm length 3000mm ,cross T of size 15X32 mm of length 600mm to from grid module of size 600mm X600mm suspended from Ceiling using galvanised mild steel items (galvanizing @ 80 gms per sqm) i e 50mm long ,8mm outer dia M-6 hanger rod upto 1000mm length and L shape level adjuster of size 85X25X2mm galvanised iron perimeter wall angle of size 24X24X0.40mm of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plug at 450mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications ,drawing and as per direction of the Engr- in Charge. | 120.00 | Sqm |
| 3 | S&F 4.5 mm thick linoleum,plain coloured ,laid in floors including stretching ,cutting and sealed down with an approved adhesive fitting complete all as specified and directed by Engineer in charge. | 44.00 | Sqm |
| 4 | Taking down chowkhat or frame with shutters (with out taking off the shutter from the frame ) exc 1.5sqm but n exc 1.5 sqm each | 3.00 | Each |
| 5 | S&F factory made steel window/ventilator 1.25mm thick box type (primer coated) ERW hollow P section of size 60 25mm including grill using 10sqmm bar double rebated both gauge and glass shutter comprised gauged glazed skelton shutter ERW sec 50 20mm and 1mm thick with two openable leaf consisting two Nos sash bar of T sec 20 3mm complete welded to frame with one vertical mullion of ERW box type T sec of size 60 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC (1:2:4) type B-1 four Nos for Each window including following fitting welded to frame shutter :- (a) Hold fast 150mm long of 12 3mm made to shape 04 Nos per window, (b) Handle of Z sec 20 25mm, 100mm long per No leaf, (c) Stainless steel tower bolt 150mm long, 02 Nos per leaf, (d) Z sec 20 25mm, 100mm long stopper 01 Nos per leaf, (e) cleat 55mm long of hollow square 15 20 63mm welded to hinge 01 Nos per leaf,(f) MS pintal hinges of size 75 12mm, 02 Nos per leaf incl. Stainless steel wire cloth , 0.25mm to 0.36mm nominal dia of wire & average width of aperture 1.40mm to 2mm & fixed with alluminium wire staples and glass pane 3mm thick fixed with MS pin and oil putty incl. two coats of synthetic enamel paint complete incl taking down existing window/ventilator. Note:- During fixing of windows/ventilator, surfaces shall be make good in plumb with existing finishes like cement plaster, similar wall tile,floor tile etc and as per site requirement. | 6.00 | Sqm |
6 Days Left