| 1 | Supply, Fixing, testing and commissoning of High Spine Washer Extractor, Soft Mount 30kg Capacity, Electric Heated, Front Loading, Stainless steel cabinet, Computer Controlled. Model: AXE30
(a) Capasity : (1:10) 30kg dry weight of 100% cottons per charge. (inner cylinder volume to be at least 10 Ltrs for 1 kg of dry line)
Outer Cabinet Stainless steel 304 quality front, sides top and back covers SS front door interlocked with drive.
(b) Outer Drum : Stainless steel of 304 quality duly reinforced to support front door bearing housing springs electric motor& shock absorbers.
(c) Inner Cylinder : Stainless steel of 304 quality dimpled perforation coned SS Back-End-plate with tapered SS bush at the center push fit Main shaft easy to dismantle (Carbon steel shall not be used anywhere on the cylinder).
(d) Suspension : Coil spring and hydraulic shock absorbers.
(e) Bearing Housing: cast iron one piece bearing housing with extra wide roller & ball bearings packed with lubricants & sealed self lubricating seals for water tightness & for lubricant tightness of bearing .
(f) Drive Single motor with variable Frequency drive for various speeds for wash , distribution low, normal & high spin extract.
(g) Operating Computer: smart 7" coloured touch screen HMI with fully programmable PLC, Customized processes & step by step LCD instructions for cycle advance, variable time signal process modification & diagnostic checks. | 1.00 | Each |
| 2 | Contd...Ser Item 1.00.
(h) Soap Dispenser: 5 compartment in built soap dispenser for powder & liquid detergents, each fitted with independent water solenoid valve & pressure jet optional provision for external liquid dozing.
(j) Inner Cylinder Dimensions: 900 x 500 mm depth.
Inner cylinder volume: Atleast 315 ltrs.
(k) Final Extract Speed / G Force: Atleast 900 RPM / 350G.
(l) Clear Door Opening: Atleast 500 mm .
(m) Electric Motor Size: 5.5 KW ,415V, Three phase AC.
(n) Water Inlet: 25 mm (0.75"BSP) Solenoid valve operated.
(o) Electric Heating Load : 12-18 KW.
(p) Drain : 65 mm ( 2.5 " BSP) Motorized, non clog Drain Valve.
(q) Dimensions: Width: 1300mm, Depth: 1400mm , Height: 1725mm,Wight 1380 Kg.
(r) Electric supply : 415 V , 3 Phase , 50 HZ AC.all as specified and directed by Engr-in-Charge. | | |
| 3 | Supply, Fixing, testing and commissoning of Drying Tumbler. Stainless Steel Cylinder. Computer Controlled. Reversible. 30Kg Capacity. Electric Heated. Model : DRE30
(a) Introduction : Stefab Drying Tumbler 30Kg Capacity. Electric Heated. Stainless Steel cylinder. Microprocessor Contral. Reversible with Auto Cool Down Feature.
(b) Capacity : 30kg dry weight of 100% cottons per charge.
(c) Outer Cabinet : Double-walled front and rear panels with a durable hot-painted finish. Front & Back service only allows multiple units to be joined together for streamlined installation.
(d) Inner Cylinder : Manufactured from high-grade Stainless Stainless Steel 304 with precision-engineered perforations for uniform airflow. Reinforced back-end plate with M.S. channel and trunnion support for enhanced structural strenght and durability.
(e) Electric Controls : Advanced LED disply control panel with programmable digital time settings for drying and cool-down cycles. Step indicatiion system for clear operational monitoring.
(f) Drive : Heavy-duty drive mechanism with V-belts and pulleys mounted on self-aligning ball bearings ball bearings housed in plummer blacks, ensuring smooth, vibration-free operation and long service life.
(g) Suction Blower : High-effciency aluminum cast suction blower directly driven by an independent motor. Aerodynamically optimized for superior ariflow and energy-effcient performance. | 1.00 | Each |
| 4 | Contd..Ser Item No 2.00.....
(h) Electric Radiator : Formed out of Stainlees Steel Heating Elements with Galvanized rectangular fins.
(i) Lint Screen : Fron-accessible, Lint Screen desinged for easy removl and maintenance, ensuring consistent airflow and reduced downtime.
(j) Inner Cylinde3r Dimensions : 950 x 850 mm depth.
(k) Inner Cylinder Volume : 602 ltrs.
(l) Clear Door Opening : 650 mm.
(m) Drive Motor : 0.75 KW, 415V, 3-Phase, AC. ISI Marked or Equivalent.
(n) Blower Motor : 0.75 KW, 415V, 3-Phase, AC. ISI Marked or Equivalent.
(o) Exhaust : 210 x 210
(p) Electric Heating Load : 18-24 KW.
(q) Dimensions : Width: 1050mm x Depth: 1425mm x Height: 1980mm.
( r ) Weight : 570 kg. Approx.
(q) Electric Supply : 415V +5%, 3Phase, 50 Hz, AC. | | |
| 5 | Supply, Fixing, testing and commissoning of Flatwork Drying Ironer, Chest Heated, Front Feed, Front Return, Roller Size: 380 x 2000L. Electric Heated. Model: FRE38-200.
(a) Introdution : Flat Work Drying Ironer, Chest Heated, Roller & Chest Size : 380 x 2000 mm length. Electric Heated. Front Feed, Front Return.
(b) Roller : Made of steel, Precision machined with perforations throughout its length & periphery for moisture suction. Runs on self aligning ball bearings. Pedded with galvanized springs & double layer polyester padding.
(c) Ironing Chest : Sliding type. Precision machined, ground smooth and polished Chest moves back & forth throught pneumatic cylinders at both sides. Perfect contect with the roller. Adjustable & uniform ironing pressure across the entire roll. Chest moves back automatically at the time of power failure or when the machine is stopped.
(d) Main Body : Made of steel. Hot painted. Full length conveyor feed belts. Full length, underneath linen collection tray.
(e) Drive : Single Motor working in conjunction with variable frequency drive. Roller is driven by an electric motor coupled with a reduction gear box unit which is lubricant packed & sealed. The final transmission is through sprockets & chain. Easy chain tensioning device.
(f) Controls : Push buttons to start & stop the machine. Auto digital temperature control. Rocker switch for forward-reverse chest rotation. Emergency stop push button. All controls at the front.
(g) Finger Safety Guard : Auto cut off by Swing Guard for false feeding & finger safety. | 1.00 | Each |
