Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4036270 |
|---|---|
| Organisation Name | Public Works Department |
| Tender Brief | Beautification Of Pattan Town And Allied Works B.w.o Electric Work. |
| Last Date For Submission | 1st May, 2026 |
| Opening Date | 02 May, 2026 |
| Document Cost | 600.00 |
|---|---|
| EMD | 24544.00 |
| Estimated Cost | 1227200.00 |
| City | Pattan |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | SITC of ISI marked Lazer Cut decorative outdoor LED light fixture post, complete with mild steel pole and integrated luminaire housing suitable for pathway/park illumination, including all accessories as required for proper installation, operation and commissioning. Technical Specifications: Material: Mild Steel pole and luminaire housing. Pole Height: Approx. 3.45 m (overall) with 574 mm luminaire head. Pole Size: 220 mm square with decorative perforation design. Base Plate: 350 350 mm with 4 nos. 18.5 mm holes on 282 mm PCD. Coating System: Shot blasting pre-treatment, epoxy primer, and UV-resistant PU/polyester powder coating. Light Source: High power, high efficiency LED chips mounted on MC PCB. Heat Sink: Aluminium heat sink with thermal paste for effective heat transfer. Protection: IP65 (optical area) with silicon rubber gasket sealing system; IK06 impact protection. Electrical Parameters: LED Wattage: 40 W (perforation) / 4 36 W (luminaire) Rated Voltage: 230 V AC, 50 Hz Power Factor: >0.95 THD: <10% Surge Protection: 4 kV driver with 10 kV SPD CCT: 5700 K (as approved by Engineer-in-charge) Mains Current: <1 A Driver: High-efficiency LED driver pre-wired up to terminal block in junction box. Mounting: On suitable RCC foundation with necessary anchor bolts, nuts, and washers (foundation bolts included in scope). Ingress Protection: IP65 rated optical assembly with silicon gasket sealing. Complete with internal wiring upto pole box (Including Pole Box with 16 Amp MCB and 16 Amp Connector). K-lite, neeri,Phillips kesellec, homdec/Eq.make to be approved by EIC The job/ contract includes 03 years replacement warranty for lighting fixtures after DLP (from date of successful completion of work) | 30 | Job |
| 2 | Supply/Laying/Connecting and Commissioning of 16 sq.mm 2-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/Polycab/Eq. Make with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench .(Material to be approved before execution) | 350 | Meter |
| 3 | Supply/Laying/Connecting and Commissioning of 25 sq.mm 3.5-Core XLPE/PVC insulated and steel armored 1.1 KV grade Aluminum Cable of Havells/Polycab/Eq. Make to be approved by EIC with required size of thimbles dully crimped with hydraulic crimping tool including Providing/Fixing of saddles/clips with making of connection and partially to be laid underground through DWC High Density Poly ethylene Pipe having Corrugation on Outer wall and Plain surface inner wall Conforming to IS: 14930 Part-1 and 2 Complete with accessories for Protection of 1.1 KV Grade under Ground cable Directly in Ground at a Depth of 50 CM including excavation and Refilling the Trench .(Material to be approved before execution) | 20 | Meter |
| 4 | Supply/ installation/testing and commissioning of CPRI Approved (IS/IEC:61439) panel outdoor type , Mian Distribution panels ,fabricated out of sheet steel of 16 gauge dust protected, painted incl earth terminal with all necessary accessories as required for panel with internal wiring of panel and grouted in concrete .The Panel is to provided and fitted with following adjustable type controlling /Protection switch gear devices (1) Normal Incoming 100 Amp TPN MCB 10 kA with thermo magnetic adjustable based of Legrand / Siemens/ ABB /Schinder /L&T/Havells / eq. make to be approved by EIC = 1 no 150 Amp SPN Bus bar Al Strips = 1 Set Outgoing: 40 Amp DP = 4 No. for Supply to the Lights | 1 | Job |
| 5 | Supply ,installation ,testing , &commissioning of 3.5 KVA Digital VOLTAGE Stabilizer of Approved brand with following SPECIFICATIONS :Input voltage= 90 volts & output voltage=220-230 volts Copper wound 99.9% , ,High cut/Low Cut / Over Cut through Micro Control and Spike Protection including ,Carriages,installation charges , testing & taxes complete job . Protections are Over LoadCOPPER wound of /Chinar / Electric Field /Alba /AE /Cosco/ eq. make to be approved by EIC ISI/1SO certified for smooth functioning/ constant voltage supply. | 2 | No. |
13 Days Left