Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4943864 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair And Replacement Of External Water Supply Gi Tubing Maint Of Pumps And Motor Cleaning Of Ug Sumps Oh Tank Pipe Line And Other Miscellaneous Work At Diber Field Station Pithoragarh |
| Last Date For Submission | 11th Aug, 2026 |
| Opening Date | 12 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 18000.00 |
| Estimated Cost | 900000.00 |
| City | Pithoragarh |
|---|---|
| State | Uttarakhand |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Contract Details | ||
| 2 | Material and Labour for cleaning of RCC OH water reservoir, pumping out all water, taking out dirty water, stone pieces and sludge etc by using buckets / motor, cleaning and extraction of all dust/sand/mud/Algae deposits from walls,floor & mouths of inlet and outlet pipes etc and by rubbing with wire brushes making it free from algae growth, washing with water and cleaning the tank inner surface with suitable cleaning agent (bleaching powder) ,cleaning of all MS /iron/wooden frame work inside and roof of the reservoir & general cleanliness of the outside surface, plastered internal surface of the tank & applying two coats of approved make & shade of snowcem on all sides of the tank & two coats of approved make & shade of snowcem of all sides of the outside of the tank including necessary painting with one coat of black bituminous paint on all steel /iron surface of tank including marking of tank capacity and date of cleaning. and fresh water and removing dirty water out of the tank complete with in 12 Hrs and writing date of cleaning on external surface of wall with synthetic enamel paint after removing old date complete all as specified and directed. | 2 | Each Job |
| 3 | Material and Labour for cleaning of underground sump, pumping out all water, taking out dirty water stone pieces and sludge etc by usnig buckets / motor, cleaning and removing all dirt and plant fungee completely from wall and floor of the tank and from mouths of inlet and outlet pipes etc and by rubbing with wire brushes and removing all waste to distance not exc 50 mtr and depositing where directed cleaning the tank inner surface with suitable cleaning agent (bleaching powder) and fresh water and removing dirty water out of the tank complete with painting with two coat of black bituminous paint on all the steel /iron surface of tank , writing date of cleaning on external surface of wall with synthetic enamel paint after removing old date complete all as specified and directed. | 2 | Each Job |
| 4 | Material and Labour for cleaning of open well by stopping water from inlet, pumping out all water, taking out dirty water, stone pieces, mud and sludge etc by usnig motor/buckets, cleaning and further digging bottom surface at least 3 feet deep and removing all mud, dirt and plant fungee by rubbing with wire brushes completely and removing all waste to distance not exc 50 mtr and depositing where directed complete with in 12 Hrs and writing date of cleaning on external surface of well with synthetic enamel paint after removing old date complete all as specified and directed. | 1 | Each Job |
| 5 | Taking out, lifting , transportation of defective submersible pumpset to workshop for repair and lowering, refixing, testing and running the submersible pump set after repair incl removing old burnt windings of motor incl defective pump of the submersible electric motors of cap 05 HP to 15 HP, three phase, 415 Volts, 50 Hz, and rewinding of submersible electric motors incl cleaning the slots with carbon- tetra-chloride solution before rewinding, leath work for shaft repairing and welding, threading, polishing incl transportation to site, fixing of serviceable parts in position, removing & replacement of defective / unserviceable parts, lowering down of the submersible pump set of any description and any capacity & in any position, in well alongwith column pipe and submersible cable of any size including making necessary electric connections & testing the pump set after lowering, replacement of unserviceable parts if required, fixing charges of the parts replaced/repaired is deemed to be included in the above quoted rates. complete all as specified and directed. NOTE : (i) Contractor shall take proper precautions while lifting out and removing pump set from well and lowering & refixing the pumpset into the well after repair,so as to avoid any damage to column pipe and submersible cable. (ii) The windings of motor including windings wire and connected material incl nut bolt washer grease and gland rope if required is deemed to be included in above quoted rates. (iii) All necessary T&P and equipments required for lifting out & lowering the pump set in the well etc shall be arranged by the contractor at his own cost. | 2 | Each Job |
6 Days Left