| 1 | Construction of Intakewell
Survey,Investigation, Planning, engineering ,drawing/design,vetting of IIT/ NIT/ REPUTED ENGINEERING COLLEGE, soil investigation ( up to 50 m depth )Reesign(if necessary) and Construction of CONSTRUCTION OF INTAKE WELL CUM PUMP HOUSE (6MLD on 16 hours pumping time) as per design WITH RCC FOOTBRIDGE up to 150 m length and 5.0m width with 0.6M Both side paver paver blocks foothpath with 2.4 m height railing with cover of top parts all necessary equipment & Appurtenant Works, including Electrical works, including supply of all materials, labour, tools and plants etc. Provision for piping work for flushing choking material from the inlet pipe complete as per instruction of engineer in charge. Provision for inlet pipe of 400 mm dia (4NOS x30MTR). Supply and fixing of Kirloskar valves 3 nos of Pn 10 of dia 400 mm with spindle/wheel with all mountings and accessories complete. Supply and fixing of M.S. Ladder for Construction of Intake Well inside the reservoir of dam or river, with minimum required depth and diameter as mentioned below with pump house in RCC framed Structure, of minimum height of 6.0 m with required length of RCC footbridge with railing, of minimum 3.75 m clear width or more as required to transport the pumping plant machinery by vehicle excluding curb, piping & cable, pump floor level minimum 1.5 m above HFL, water inlet openings with sluice gates, having different intake capacity of water at different inlet points, construction of spiral RCC staircase upto bottom, grit chamber with mechanical scraping belt or bucket for de-gritting the well, Pump house operating Slab, a separate electrical gantry of suitable capacity, cemoent concrete floor with hardener, rolling shutter fabricated from steel, Circular Balcony minimum 1 m width, staircase post-column beams,horticuture,greeneries, orboricutres, Railings, development of land, approach CC road etc. arrangement should be made inside pump house such that to fix required nos. of VT Pumps mentioned in item nos. 4, HT and LT panels and starters, including all earthing as requried, instrumentation & SCADA & wireless telemetry (voice & Data), internal and external electrifications and adequate LED lighting including excavation/ Disposal of soil i.e. Kankar mixed morrom/soft/hard rock and concrete of minimum grade of M-15 and all R.C.C. work in grade M-30 or above in raft/pile foundation, Intake, RCC, wall with supply of all type steel bars of approved quality and cement as approved by the Employer, cofferdam construction with bailing out water as per site construction requirement diversion arrangement of flow of river during construction by making bundh across the river supply with gunny bags, sand, fixing suitable size of steel girder, dismantling and refixing etc. and also supply and fixing of collapsible gate, Aluminium door, Aluminium window as per relevant specifications, fresh air circulation arrangement, including of one-coat Primer, two coat Distamper in inner side & external painting with apex ultima/equivalent paint, all steel work must be painted with red oxide paint and two coat of anticorrosive paint etc. and internal and external electrification of intake well, supply and fixing of three-row railing of 20 mm dia GI Pipe with M.S. Angle posts supply and fixing of inlet openings of required capacity, including supply of all materials, all labor T&P etc. required for proper completion of works as per direction of the Engineer and Consultant, Anything not mentioned will be as provision laid down in CPHEEO GOI Manuals. Cost of VT Pumps, Motors. Panels, SCADA, Panel Board, Pipes etc. are not covered in this item. | 1 | JOB |
| 2 | Construction of Water Treatment Plant
Survey, soil Investigation (up to 30 m depth), Planning, engineering, DRAWING/Design,vetting of IIT/ NIT/ REPUTED ENGINEERING COLLEGE,redesign(if necessary) Construction and Commissioning of WTP capacity 5 MLD (16 HOURS PUMPING time) with CWR as per required capacity. For construction of WTP, Admin Building with Command Control Room, Sub station room and fire fighting arrangements, first aid arrangements Circular Cascading Aerator, Inlet chamber, alum dosing, pre-sedimentation Tank, Rapid Mix, Vertical Flow Clarifloculator, Rapid Gravity Filter with Back Wash Arrangement, Proper Sludge Disposal and Backwash water disposal arrangements to nearest drain/low laying area & Appurtenant Works. Automated through PLC with outputs to SCADA, walkway in between WTP components with railing, Guard Room,meter room, transfermer yard, dg plateform, Chemical Store room 45 days storage capacity,laboratory with equipments as per cpheeo manuals below than ONE LAC population in ULB ,required boundary wall with gate ,required cc approach road with drains, land escaping ,greneeries,horticuture,aboriculture, STAFF QUATER TWO ROOM SET-3 nos. Gaseous Chlorination Plant, Development of WTP area with adequate plantation, Rainwater harvesting unit. Raw water to be treated and filtered. Lean concrete to be used of grade not less than M-15 and other structures in minimum M-30 grade of concrete including excavation/ disposal in all types of soil, kankar, soft rock, hard rock etc. . Cement and steel should be as per approved by the Employer/IS code. Collapsible MS steel doors and aluminium windows to be provided including of One-coat Priming, internal two coat Distamper painting, external painting with apex ultima/equivalent paint/weather Paint, all steel work must be painted with red oxide paint and two coat of anticorrosive paint etc, where water contact internal part with 3 coat food grade epoxy paint. and internal and external electrification with adequate LED lights for the compound, including automation, instrumentation & SCADA, wireless telemetry (voice & data) Including water testing kits, lab building and essential lab equipments Including supply of all materials, labour T&P etc disposal of surplius of eath/ malva dist. up to 10 km distance from munciple limit. required for proper completion of works as per direction of the Engineer. All building works may be constructed RCC FRAME STRUCTURE | 1 | JOB |
| 3 | Rising Main :- SURVEY, DESIGN/ DRWAING, VETTING OF IIT/ NIT/REPUTED ENGINEERING COLLEGE,REDESIGING (if necessary)Supply of following sizes (D.I. k-9) pipes for rising main system conforming to latest/relevant I.S. 8329/2000 Specifications with all jointing materials such as MJ joints, tee ,bends, all required mild steel fabrication works (if MS fabrication used, its proper protection treatment against corossion must be done) and all DI specials conforming to latest /relevant I.S. specifications, suitable for D.I pipes, as per IS 1239 /2000 and IS 8329/2000 or their latest amendment& CPHHEEO MANUALS with latest amendments including F.O.R. destinations rate per metre in Rs., anywhere in U.P. including cost of one Rubber Gasket per pipe length & inclusive of all Taxes & Duties, Third Party Inspection Charges, Packing & Forwarding Charges, Transit Insurance Charges, Road Transportation Charges etc. with loading, unloading and Carting up to store, also including specials for these pipes all complete as per instructions of Engineer in charge. | | |
| 4 | 300 mm dia. | 4000.00 | M |
| 5 | 200 mm dia. | 6020.00 | M |
