Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4498961 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair To Roof, Wall, Chajja Etc At Smq, Pratap Nagar And Nsb Ins Shivaji Lonavla |
| Last Date For Submission | 3rd Jul, 2026 |
| Opening Date | 06 Jul, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 94000.00 |
| Estimated Cost | 4700000.00 |
| City | Pune |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Completely removing existing water proofing treatment of any descriptions and any type including top layer of plaster / china mosaic wherever occurs over roof and chhajja surfaces and scrubbing the surface with wire brush and cleaning wash down with water to receive new cement plaster / PCC layer and removing the waste material / debris to a distance exc. 1500m but n.exc. 2000m etc complete all as specified and directed by Engineer-in-Charge | 1050.00 | Sqm |
| 2 | M/L for rendering 10mm thick in cm 1:4 on concrete roof and chajja surface to get a uniform level surface for laying of membrane treatment all as directed by Engineer-in-Charge | 1050.00 | Sqm |
| 3 | M/L for PCC 1:2:4 type B-1 (using 20mm graded agg) for PCC padding on RCC roof surface finished even and smoother using extra cement all as specified and directed by Engineer-in-Charge. | 52.50 | Cum |
| 4 | Supply only Integral waterproofing compound. | 213.26 | KG |
| 5 | M & L for Premix Dr. Fixit Wonderproof 100 Components A and B using an electric double-paddle mixer for 2 3 minutes at low speed. Apply the first coat of Dr. Fixit Wonderproof 100 at a rate of 0.80 0.90 kg/m without dilution, using a lamb s wool or cloth roller. While the coating is still wet, roll and embed a 225 gsm Fiberglass Chopped Strand Mat, ensuring full bonding without air bubbles or wrinkles. Allow the first coat to dry for 3 4 hours. Apply the second coat at a 90 angle to the first. Overlap the chopped strand mat by at least 5 cm at the joints, ensuring the overlaps are sufficiently wet to achieve proper bonding. Once the surface is dry enough to walk on, apply the second coat at 0.70 0.80 kg/m . Apply additional coats as needed to achieve a total dry film thickness of 900 1000 microns, with a total system material consumption of 1.50 - 1.60 kg/m over 2 3 coats. Note Coating should be terminated below the drip mould on the vertical surface. The material has followed technical properties: Attains a Tensile Strength 18 N/mm2 as per ASTM D 2370; Crack bridging ability, Tear Strength 160 N/mm as per ASTM D 624, Dynamic Crack bridging as per EN 13251:2016 - No Cracks after 20000 sinusoidal cycles, Dynamic Crack bridging as per ASTM C 1305-2016 - Pass, No Crack, Pass Low Temperature Flexibility (-20 after 1000 Hrs. UV as per ASTM D 1970-2021, Shore A as per ASTM D2240 85 , Peel Adhesion to Concrete under wet Condition -24 Hrs. N As per ASTM C 794 11.4 , Abrasion resistance (CS 17 Wheel -1000 Cycle, 1.0 Kg) as per ASTM D 4060 - 7 mg , Depth of Water Permeability @ 10 Bar as per EN 12390-8-2019 Nil , Water Migratlon Resistance as per ASTM D 7281,-2007 - No Leakage, Pass Spread of flame Class A. Complies with the requirements of EN 13251:2016 for a 25-year service life when used with a 225 gsm Fiberglass Chopped Strand Mat as fleece. The system comes with 10 Years waterproofing warranty from M/S Pidilite Industries LTD. For vertical surfaces and parapet walls should be enveloped & coated / painted with Dr. Fixit Raincoat Classic or Dr. Fixit Raincoat Select Waterproof coating system. | 1050.00 | Sqm |
6 Days Left