Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4982352 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repairs To Roof Treatment And Rectification Of Seepage Leakage And Certain Allied Works In Certain Buildings At R And De E Dighi Pune 15 |
| Last Date For Submission | 13th Aug, 2026 |
| Opening Date | 15 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 50000.00 |
| Estimated Cost | 2500000.00 |
| City | Pune |
|---|---|
| State | Maharashtra |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismantling G.S. Sheet plain or corrugated steel sheeting any gauge, thickness, including Nainital or similar pattern roof covering any type pattern in roofing including ridges, hips, valleys and gutters etc.,if required dismantling iron work included and stacking the material within 50 metres lead Land complete all as specified and directed. Note : Work will be executed at any height. Hence necessary scaffloding and all sefety precaution deemed to be included under rate quoted by contractor. | 106.00 | SQM |
| 2 | M & L for precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required Land complete all as specified and directed. Note : Work will be executed at any height. Hence necessary scaffloding and all sefety precaution deemed to be included under rate quoted by contractor. | 100.00 | SQM |
| 3 | M & L for precoated galvanised steel sheet in Ridges plain (500 - 600mm) roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete all as specified by Engineer-in-charge. Note : Work will be executed at any height. Hence necessary scaffloding and all sefety precaution deemed to be included under rate quoted by contractor. | 10.00 | RM |
| 4 | M & L for Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Confirming to IS 1161-1979 grade St- 240 Land complete all as specified and directed. | 151.00 | KG |
| 5 | M & L for painting to steel surfaces with two coats including preparation of surfaces complete all as specified & directed. | 50.00 | SQM |
6 Days Left