Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 5906418 |
|---|---|
| Organisation Name | Urban Administration And Development |
| Tender Brief | नगर पालिक निगम, रायगढ़ क्षेत्रान्तर्गत उपभोक्ता फोरम (पंजरी प्लांट) के पास ऑक्सीजोन निर्माण कार्य। |
| Last Date For Submission | 23rd Oct, 2026 |
| Opening Date | 27 Oct, 2026 |
| Document Cost | 0.00 |
|---|---|
| EMD | 64300.00 |
| Estimated Cost | 0.00 |
| City | Raigarh |
|---|---|
| State | Chhattisgarh |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Applying stamping finish to the top surface of freshly laid lain /reinforcedcement concrete of specified grade in porticos, sidewalks, driveways,pool decks and open yards as per direction of the Engineer-in-Charge.The process shall include the following:-• The concrete shall be placed and screeded to the finished grade, andfloated to a uniform surface by using standard finishing techniques. Theapproved color hardener @ 2.7 kg/sqm shall be applied evenly to the surface of the fresh concrete by the dry shake method by sprinkling in two or more shakes, floated after each shake and trowelled only after the final floating. The approved release agent @ 0.113 kg/sqm shall be applied evenly to the trowelled surface before stamping or the said release agent can be applied to the flexible polyurethane stamp moulds of approved design and in required sizes to achieve final stamped pattern. These stampings shall be placed on the surface of concrete in three to four pieces at a time and tapped gently with rammers of sufficient size & weight to leave proper stamp marks and the process repeated for the remaining concrete surface till the whole surface to be stamped is completed within the time while concrete is in plastic stage of setting. specifications. After initial curing the imprinted joints shall be groutedusing cement slurry mixed with color hardener as per the requirement.The surface shall be sealed by applying acrylic based sealer not less than0.167 litre/sqm.on finished surface. • The construction joints shall be provided by groove cutting of size 4mm x 20 mm in panel size 3m x 3 m or lesser as per the site conditionsand filling the same with 10 mm baker rod and providing and laying (PU)Polyurethane based joint sealer of approved make as per anufacturer’sspecifications and finished by applying Polyurethane resin based top protective clear coat of minimum 80 micron applied with rollers on properly cured and dry clean surface. (Cost of concrete for flooring is not included in this item which shall be paid separately.) | 2,123.01 | Sq.mtr |
| 2 | SEATING BENCHES Seating Capacity : 3 SeaterStand/Legs Design : DecorativeFinsh : Powder CoatingBack Rest : WithArm Rest : WithWarranty : 1 yearWeight Bearing Capacity : 150 kilogramMaterialSide Frame Material : Cast IronSeat Material : Mild Steel Pipe 14 GaugeBack Rest Material : Mild Steel Pipe 14 GaugeTechnical ParametersBench Type : Integrated Seat and BackSeating Capacity : 3 SeaterStand/Legs Design : DecorativeFinsh : owder CoatingBack Rest : WithArm Rest : WithColour of Seat and Back : As per buyer's ChoiceDimensionsTotal Height : 750 millimeterSeat Height : 450 millimeterWidth : 550 millimeterTotal Area Required : 1350 millimeterGenericWarranty : 1 yearWeight Bearing Capacity : 150 kilogram | 16.00 | No |
| 3 | See the SOR Attechment | 01.00 | No |
20 Days Left