Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4121276 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair/replacement Of Street/security Lights,painting Of Poles And Allied Works In Zone A And B At Mil Stn Raiwala Under Age (i) Raiwala |
| Last Date For Submission | 23rd May, 2026 |
| Opening Date | 25 May, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 10000.00 |
| Estimated Cost | 500000.00 |
| City | Raiwala |
|---|---|
| State | Uttarakhand |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Supply and fixing in repair 45 W LED street lights, IP 66 & IK07 protected, housing made of powder coated single piece pressure die cast aluminium with heat dissipation housing with toughened glass cover and secondary lens on each LED & should be SMD type. The System Luminaire efficacy >= 120 lm/watt with High power LEDs is to be used and potted driver must be potted & has a unique BISR number with input voltage AC 140 V to 270 V AC with High voltage Cut off @ >= 300 V AC and auto resetting safety Input Frequency 50 Hz 3 % , Power factor > 0.95 driver Efficiency > 85 %, THD (I) < 10 %, humidity 10 % to 90 % RH, CRI >70, Working Temp -10 C to 50 C. The Luminaire shall be BIS certified and T.C certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70 % lumen maintaned and CCT 5700 K+335K. Surge protection shall be min>= 4 KV internal and min 10 KV external. Note-: The manufacture should provide warranty of street light for 2 years. | 30 | Each |
| 2 | Taking down old street light from pole for repairing of street light fitting /luminaries of any size/type/make control wiring including replacement of LED drivers 45/60/70 W and refixing the same street light on pole after repair,checking the continuity from pole to pole junction boxes all as directed by Engr-in-charge . Note : The LED driver rate deemed to be included on the quoted rate. | 32 | Each |
| 3 | Supply and fixing in repair 24 W solar street light all in one with high efficiency mono crystalline solar PV module LiFePO4 battery of capacity 12.8 V, 12 Ah with inbuilt BMS technology, MPPT charge controller, aluminium extruded body IP65 with serviceable battery compartment high efficiency LED for optimising battery autonomy complete all as specified and directed. | 2 | Each |
| 4 | S&F in repair thermoplastic cable junction box/enclosure (distribution box) for outdoor installation with knockouts for cable entry suitable for cable size 10-16 Sqm of dimension 300x200x105 mm with cable terminals and 01 no MCB (0-6 Amp) 10 KA , B curve , 230 volts complete fitted on pole with new ms clamp, nut bolt duly painted with synthetic enamelled paintover one coat of red oxide Zink crome primer on clamps complete all as specified and directed. Make of box :- Sintex/ Hensel. | 15 | Each |
| 5 | M&L for replacement light grade GI bracket made out of 32 mm dia light grade pipe 1.2 mtr long bend to shape as directed fixed to steel tubular pole with two number MS clamp made out of 40x5 mm flat iron duly painted with two coats of synthetic enamelled paint over one coat of red oxide Zink crome primer with and including nuts, bolts etc complete all as specified and directed. | 20 | Each |
6 Days Left