Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4035697 |
|---|---|
| Organisation Name | Municipal Corporation |
| Tender Brief | Repair And Service Of Storm Water Pump Sets And Mobile Pumping Unit For Monsoon Emergency 2026 Under West Zone, Mcd. |
| Last Date For Submission | 23rd Apr, 2026 |
| Opening Date | 23 Apr, 2026 |
| Document Cost | 590.00 |
|---|---|
| EMD | 8500.00 |
| Estimated Cost | 388877.00 |
| City | Rajouri |
|---|---|
| State | Jammu and Kashmir |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Repairing of the following dia/models of storm water pump i/c dismantling of pump set from base frame by cutting of nut bolts of suction side and delivery side and holding of delivery line by dead flange and thrust support and suction line by holding with tripod arrangement i/c loading/ unloading by skilled labour, to & fro cartage along with replacement of its parts/ accessories i/c gland plate/ spilt gland, MS Lock nut with Lock washer, Keys of impeller & coupling, stud of Gland plate and all packings i/c oiling, greasing, replacement of required body studs & nuts, coupling tyre, required machining works for proper balancing of complete pump unit and minor repair works and dynamic balancing with existing motor i/c installation, testing and commissioning on full load etc. as required complete in all respects.Having suction of 125mm (Model SHM 100/26) | 2 | Each |
| 2 | Repairing of the following dia/models of storm water pump i/c dismantling of pump set from base frame by cutting of nut bolts of suction side and delivery side and holding of delivery line by dead flange and thrust support and suction line by holding with tripod arrangement i/c loading/ unloading by skilled labour, to & fro cartage along with replacement of its parts/ accessories i/c gland plate/ spilt gland, MS Lock nut with Lock washer, Keys of impeller & coupling, stud of Gland plate and all packings i/c oiling, greasing, replacement of required body studs & nuts, coupling tyre, required machining works for proper balancing of complete pump unit and minor repair works and dynamic balancing with existing motor i/c installation, testing and commissioning on full load etc. as required complete in all respects.Having suction of 150mm (Model SHM 150/26) | 1 | Each |
| 3 | Replacement of shaft sleeve of following dia/mode of storm water pump as reqd. Having suction of 125mm (Model SHM 100/26) | 2 | Each |
| 4 | Replacement of shaft sleeve of following dia/mode of storm water pump as reqd. Having suction of 150mm (Model SHM 150/26) | 1 | Each |
| 5 | Replacement of bearing of following dia/mode of storm water pump as reqd. Having suction of 125mm (Model SHM 100/26) | 2 | Each |
5 Days Left