| 1 | Supply and installation testing and commissioning LT Panel out door type, manufactured by CPRI approved manfacturers, water and vermin proof protection of minimum size 1500mm x 1200mm x 500 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces and confirmig to IP-54 and the dimension of the outer shell should be adequate to accommodate inner shell giving minimum 75mm space all around and necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation extending 600mm above the GL suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment supplied fitted and connected internally complete with bus bar with other accessories all as specified and as directed..(Note: The Contractor shall submit the drawings with sample of accessories for approal before executing the work).
(a) Copper strip busbar of 1000 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos with compatible CTs, Digital ammeter and volt meter with selector switches , set of LED type, indicating lamps R,Y,B on incoming side.
(b) MCCB 4 pole, 415 volt adjustable thermal magnetic release type 630 Amps with breaking capacity 50 KA- 01 No (Incoming ) (ICS=100%ICU)
(c) MCCB 4 Pole 415 volt adjustable thermal magnetic release type 400 Amps with breaking capacity 36 KA-01Nos (outgoing) (ICS=100%ICU)
(d) MCCB 4 Pole 415 volt adjustable thermal magnetic release type 250 Amps with breaking capacity 36 KA-02Nos (outgoing) (ICS=100%ICU)
(e) MCCB 4 Pole 100A,25 KA -01 Amps Outgoing -01 Nos
(f) MCB TPN 63 Amps Outgoing -01 Nos
| 1.00 | Each Set |
| 2 | Supply and installation testing and commissioning LT Panel out door type, manufactured by CPRI approved manfacturers, water and vermin proof protection of minimum size 1500mm x 1200mm x 500 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces and confirmig to IP-54 and the dimension of the outer shell should be adequate to accommodate inner shell giving minimum 75mm space all around and necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation extending 600mm above the GL suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment supplied fitted and connected internally complete with bus bar with other accessories all as specified and as directed..(Note: The Contractor shall submit the drawings with sample of accessories for approal before executing the work).
(a) Copper strip busbar of 630 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos with compatible CTs, Digital ammeter and volt meter with selector switches , set of LED type, indicating lamps R,Y,B on incoming side.
(b) MCCB 4 pole 415 volt adjustable thermal magnetic release type 400 Amps with breaking capacity 36 KA- 01 No (Incoming ) (ICS=100%ICU)
(c) MCCB 4 pole 415 volt adjustable thermal magnetic release type 250 Amps with breaking capacity 25 KA-03Nos (outgoing) (ICS=100%ICU)
(f) MCB 4 pole 63 Amps Outgoing -01 Nos.(ICS=100%ICU)
| 1.00 | Each Set |
| 3 | Supply and installation testing and commissioning LT Panel out door type, manufactured by CPRI approved manfacturers, water and vermin proof protection of minimum size 1500mm x 1200mm x 500 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces and confirmig to IP-54 and the dimension of the outer shell should be adequate to accommodate inner shell giving minimum 75mm space all around and necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation extending 600mm above the GL suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment supplied fitted and connected internally complete with bus bar with other accessories all as specified and as directed.(Note: The Contractor shall submit the drawings with sample of accessories for approal before executing the work).
(a) Copper strip busbar of 600 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos with compatible CTs, Digital ammeter and volt meter with selector switches , set of LED type, indicating lamps R,Y,B on incoming side.
(b) MCCB 4 pole, 415 volt adjustable thermal magnetic release type 400 Amps with breaking capacity 36 KA- 01 No (Incoming ) (ICS=100%ICU)
(c) MCCB 4 pole 415 volt adjustable thermal magnetic release type 250 Amps with breaking capacity 25 KA-01Nos (outgoing) (ICS=100%ICU)
(d) MCCB 4 pole 415 volt adjustable thermal magnetic release type 160 Amps with breaking capacity 25 KA-02Nos (outgoing) (ICS=100%ICU)
(e) MCCB 4 pole 415 volt adjustable thermal magnetic release type 100 Amps with breaking capacity 16 KA-02Nos (outgoing) (ICS=100%ICU) | 1.00 | Each Set |
| 4 | Supply and installation testing and commissioning LT Panel out door type, manufactured by CPRI approved manfacturers, water and vermin proof protection of minimum size 1500mm x 1200mm x 500 mm (over all dimension) made out of 3.15 mm thick CRCA sheet dully supported with mild steel angle iron of size 50 x 50 x 6 mm vertical frame and legs with mild steel flat iron 25 x 5 mm in horizontal sides of the frame with front and back side openable ,single hinged door / shutter with locking arrengement and powder coated finish both internal and external steel surfaces and confirmig to IP-54 and the dimension of the outer shell should be adequate to accommodate inner shell giving minimum 75mm space all around and necessary preparation of steel surfaces including providing PCC (1:3:6) type C2 foundation extending 600mm above the GL suitable size and connections of all outgoing / incomming cable inclusive of necessary excavation and earthwork as required including the following fitment supplied fitted and connected internally complete with bus bar with other accessories all as specified and as directed.(Note: The Contractor shall submit the drawings with sample of accessories for approal before executing the work).
(a) Copper strip busbar of 300 amps rated capaacity wrapped with PVC sleeves with maintained the colour code and provision of making holes with Copper nuts, bolts & washers for cable connections including hydrograpic insulators with nuts & bolts at both ends = 04 Nos with compatible CTs, Digital ammeter and volt meter with selector switches , set of LED type, indicating lamps R,Y,B on incoming side.
(b) MCCB 4 pole 415 volt adjustable thermal magnetic release type 160 Amps with breaking capacity 25 KA- 01 No (Incoming ) (ICS=100%ICU)
(c) MCCB 4 pole 415 volt adjustable thermal magnetic release type 125 Amps with breaking capacity 25 KA-01Nos (outgoing) (ICS=100%ICU)
(d) MCCB 4 pole 415 volt adjustable thermal magnetic release type 63 Amps with breaking capacity 16 KA-02Nos (outgoing) (ICS=100%ICU)
(e) MCB 10A 2 pole -02 | 2.00 | Each Set |
| 5 | Fabricate supply install test and commissioning of Bus bar box out door type totally enclosed dust and vermin proof protection minimum size 900x600x500(Overall domension) mounting with hinged doors and locking arrangement front and back fabricated out of 3.15 mm thick CRCA sheet CPRI approved test type make including powder coated paint finish including all accessories, provision independent removevable MS plates for fixing cable glands for all incomming and out going cables and complete control wiring with 2.5 sqmm copper conductor incuding necessary PCC foundation complete all specified. Note :- (1) Rates deemed to be included for suitable lugs and glands for incoming and out going of LT UG cable.(2) The Contractor Shall submit the drawing with sample of accessories for approval before executing the work.
(a) (b) MCCB 4 pole, 415 volt adjustable thermal magnetic release type 160 Amps with breaking capacity 25 KA- 01 No (Incoming ) (ICS=100% ICU)
(b) Electrolytic grade aluminium bus bar 300A rating for 3 phase and neutral including PVC colour coded sleves. - 01 Set
(c) LED lamps for R,Y,B Phase indication with control fuse/MCB - 01Set.
(d ) Volt meter digital type 96 sqmm with selector switch - 01 set.
(e) Amps meter digital type 96 sqmm with CT's 160/5 -03 Nos and selector switch - 01 Set
(f) Insulators, wiring, bus bar sleeves, lugs, gland, sheet metal enclosure etc including complete wiring with suitable size of copper wire
| 5.00 | Each Set |
