Empowering Indian businesses in the procurement ecosystem since 2012
| Tender ID | 4899065 |
|---|---|
| Organisation Name | Military Engineer Services |
| Tender Brief | Corrigendum : Repair Of Damaged Floor Tiles Kota Stone Broken Roof Sheet Joineries Cup Boards Painting Of External Surfaces In Various Loc At Burki Nd Tpt Lines Nd Replcment Of Feder Pilar Boxs At Nmkum Nd Khjatoli Nd Repair Of Damaged Pt Wiring Switch Socket Etc |
| Last Date For Submission | 6th Aug, 2026 |
| Opening Date | 13 Aug, 2026 |
| Document Cost | 500.00 |
|---|---|
| EMD | 54000.00 |
| Estimated Cost | 2700000.00 |
| City | Ranchi |
|---|---|
| State | Jharkhand |
| # | Item | Qty | Units |
|---|---|---|---|
| 1 | Dismatling and taking down old unserviceable LT feeder pillar and Supply, installation, testing and commissioning of LT Feeder pillar not lss than 0.500x0.600x0.50m, outdoor type factory made (CPRI approved) with canopy, double door, front & back both side oenable type fixed with hinges and locking arrangement with Aldrop latches, fabricated of CRCA sheet, inner sheet 2.0 mm thick hinged type door for individual MCCBs and outer 3.15 mm thick, gasket, rubberised gasket, supported on 50x50x6 mm angle iron and Tee section frame dust and vermin proof complete with aluminium bus bar 4 Nos, 300 Amps rated capacity mounted on porecelain insulators totally enclosed chamber for protection 3 Phase 415 volt with suitable capacity aluminium bus bar/PVC copper cable control wiring duly mounted on PCC foundation with suitable size of bolts, nuts & washers wih danger notice plate. Panel board shall be powder coated and angle iron frame painted with black synthetic enamel paint over a coat of red oxide primer complete, connecting existing cables with suitable size glands and lugs to accommodate complete all as specified and directed. | 2.00 | Each Job |
| 2 | Servicing to LT Feeder pillar boxes comprising MCCBs/change over switches metering eqpt etc. as incomming/outgoing controls including cleaning, greasing the hinges, locking arrangement, checking the seviceability of individual items, identification of the defective parts replacing the wornout fastners, insulators, rubber door beadings, gakets etc all as directed Note:- (1) Unserviceable parts replaced if any shall be measured & paid seperately under respective items. | 10.00 | Each |
| 3 | Removing the existing hinges by cutting and supply and fixing of new hinges all as per existing size | 8.00 | Each |
| 4 | Painting of LT feeder pillar boxes with two coats of synthetic enamel spray paints over a coat of red oxide primer matching existing colour after scrapping the old paint by means of emery paper and cleaning with thinner including necessary markings/sign writing etc complete all as specified and directed. | 8.00 | Each Job |
| 5 | Rewiring the LT feeder piller by means of PVC insulated multi strandard copper wire of existing size including replacing unserviceable connectors, fastners etc,after taking out the old unserviceable wiring all as directed. | 8.00 | Each Job |
6 Days Left