| 1 | Supply, Installation, Testing and commissioning of Online Effluent Quality Monitoring System with complete Engineeing Panel, Cloud connector (Devices) for online server connectivity with all electrinics for monitoring
parameters including COD, BOD, TSS and pH including online data transfer to HSPCB, CPCB and PHED website on
daily basis complete at Project. for online (continuous) measurement of PH, Total suspended solids (TSS), Chemical Oxygen Demand (COD), Biological Oxygen Demand (BOD) by single analyzer with various sensors (Spectral measurement in the UV-VIS range 200-720 mm) performing reagent and chemical free analysis with automatic cleaning of censor, single cables and power cables, local data acquisition and display of data on continuous basis for up linking the date to CPCB, HSPCB and PHED,Irrigation, TUV approved complete in all respects as Central per Pollution Control Board (CPCB) guidelines for online continuous monitoring system for effluents and as Contained in scope of work in the notice inviting tender.
1. Multi-Parameler measuring converter, for connecting upto 18 intelligent sensors, scope includes 6 analog outputs (014-20mA), wide-range power supply Optical COD/BOD and TSS probe with spectral processing of the UV-VIsnge, for measurement in the inlet/ effluent/ BNR part of municipal waste water treatment plants at various Locations in Haryana State with integrated with automatic cleaning.
2. Robust digital pH/ORP sensor for pH/ORP electrodes, withbuilt-in pre-amplifier and temperature sensor with Automatic Temperature Compensation (ATC), Cable length 100meter (minimum)
3. Sensor adapter cable for all intelligent sensors, with IP69 water proof connection to the intelligent Sensor Netsystem, Cable length 100 meter (minimum).
4. Data transfer to CPCB, HSPCB and PHED, Irrigation servers complete as per satisfaction of Engineer-in-Charge 5. Providing GSM 4G, 5G modem with mobile network Connectivity including network charges (1 year warranty) complete as per satisfaction of Engineer-in-Charge.
No Extra Payment will be made for this job, It included all accesories and parts as required.
(GST not included in this Item Rate)
| $1.000 | Job |
| 2 | Providing and lowering of 150 mm outer diameter UPVC threaded pipe (pressure rating 10 kg/cm ), duly ISI marked conforming to IS: 4985 for potable water supply applications including all jointing materials, handling, lowering, alignment and fixing, complete in all respects, as per directions of the Engineer-in-Charge. | $400.000 | Metre |
| 3 | Supplying, installing, testing and commissioning of 800 mm sluice valve generally confirm to IS: 14846 and outside screw Rising Spindle of SS: 304, with length over flanges as per PD of IS: 14846 corresponding to BSEN -558/ISO 5752 basic series 3 in DI construction (GGG 40/IS1865 Gr.500/7) having metal seating (IS:318 Gr. LTB2 with 2% Nickel / SS AISI 304) 400 and above shall be fitted with ball thrust bearings, enclosed spur gear box, back seat bush as accessories for ease of operation, shall be coated internally and externally with epoxy liquid coating (minimum DFT 200 micron), valves 50 and above shall be rated PN1.0/1.6 as per final design of BOQ and flanges faced and drilled as per IS: 1538 table 4 and 6 /IS: 9523/BS EN 1092-2.Operation - including Electric Actuator (AUMA / ROTORK / MARSH / LandT/VTM/ABB with integral starter) complete in all respect as per site requirement and to the satisfaction of Engineer-in-charge, of make IVC Nasik/Kirloskar/KBL/Jupiter or any reputed brand.(Rates excluding GST) | $2.000 | Each |
| 4 | Providing, supplying, installing, testing andcommissioning of 800 mm dia Non-Return Valve (NRV) of brands IVC Nasik/Kirloskar/KBL/Jupiter or any reputed brand, Valve upto 600mm dia. Shall be confirm to IS:5312 part 1 and above to IS:5312 part 2. Valve shall be in graded DI (IS:1865 Gr.500/7) with metal to metal (IS:318 Gr. LTB2 with 2% Nickel / SS AISI 304 stub pin and slants seat design. Valve above 600mm dia must be multi-door design with doors having minimum two integral lugs for hinging of the door. Valves 50 and above shall be rated PN1.0/PN1.6 as per final design of BOQ) and flanges faced and drilled as per IS: 1538 table 4 and 6 IS: 9523/BS EN 1092-2 complete in all respect as per site requirement and to the satisfaction of Engineer-in-charge (Rates exclusive GST) | $1.000 | Each |
| 5 | Providing, supplying, installing, testing andcommissioning of 400 mm dia Non-Return Valve (NRV) of brands IVC Nasik/Kirloskar/KBL/Jupiter or any reputed brand, Valve upto 600mm dia. Shall be confirm to IS:5312 part 1 and above to IS:5312 part 2. Valve shall be in graded DI (IS:1865 Gr.500/7) with metal to metal (IS:318 Gr. LTB2 with 2% Nickel / SS AISI 304 stub pin and slants seat design. Valve above 600mm dia must be multi-door design with doors having minimum two integral lugs for hinging of the door. Valves 50 and above shall be rated PN1.0/PN1.6 as per final design of BOQ) and flanges faced and drilled as per IS: 1538 table 4 and 6 IS: 9523/BS EN 1092-2 complete in all respect as per site requirement and to the satisfaction of Engineer-in-charge (Rates excluding GST) | $4.000 | Each |
